background image

 

 

 

General Warranty 

Lilliput warrants that the product will be free from defects in materials and workmanship 
for a period of 3 years (1 year for accessories) from the date of purchase of the product 
by the original purchaser from the Lilliput Company.  This  warranty only applies to the 
original purchaser and is not transferable to the third party.  If the product proves 
defective during the warranty period, Lilliput either will repair the defective product 
without charge for parts and labor, or will provide a replacement in exchange for the 
defective product. Parts, modules and replacement products used by Lilliput for warranty 
work may be new or reconditioned like new performance. All replaced parts, modules 
and products become the property of Lilliput. 

In order to obtain service under this warranty, Customer must notify Lilliput of the defect 
before the expiration of the warranty period. Customer shall be responsible for 
packaging and shipping the defective product to the service center designated by Lilliput, 
and with a copy of customer proof of purchase. 

This warranty shall not apply to any defect, failure or damage caused by improper use or 
improper or inadequate maintenance and care. Lilliput shall not be obligated to furnish 
service under this warranty a) to repair damage resulting from attempts by personnel 
other than Lilliput representatives to install, repair or service the product; b) to repair 
damage resulting from improper use or connection to incompatible equipment; c) to 
repair any damage or malfunction caused by the use of non-Lilliput supplies; or d) to 
service a product that has been modified or integrated with other products when the 
effect of such modification or integration increases the time or difficulty of servicing the 
product.

 

 

 

Please contact the nearest Lilliput's Sales and Service Offices for services or a complete 
copy of the warranty statement. 
For better after-sales service, please visit 

www.owon.com.cn

 and register the purchased 

product online.   

 
Excepting the after-sales services provided in this summary or the applicable warranty statements, 
Lilliput will not offer any guarantee for maintenance definitely declared or hinted, including but not 
limited to the implied guarantee for marketability and special-purpose acceptability. Lilliput should 
not take any responsibilities for any indirect, special or consequent damages. 
 

For more details, please  refer to  the user manual on the supplied  CD,  it  can  also  be 
downloaded at 

www.owon.com.cn

 .

 

 

Summary of Contents for Waveform Generator

















Reviews: