GAS LIGHT PATIO HEATER
ASSEmbLy InSTRucTIOnS
mOdELS Td100A, Td102A, Td104A & Td110A
unPAckInG HEATER
Check all items for shipping damage. If heater is damaged, promptly
inform dealer where you bought heater.
1. Remove first base half from box.
2. Remove top cap, 2 deco light shrouds, top and packaging materi-
als from box. Set parts aside in a safe location.
3. Remove burner assembly from box, leaving packaging materials
on bottom of assembly. Set aside in the upright position.
Top Cap
Cabinet
Base
Burner
Assembly
Light Shroud
Screens
Lightpost
Top
Deco Light
Shrouds
Lightpost
Panels
Tank
Door
Hardware Packet
You should have the following assembly parts:
Top Cap (1), Burner Assembly (1), Cabinet Base (1), Front Base (1),
Rear Base (1), Wheel (2), Base Cabinet Door (1), Lightpost Panel (4),
Deco Light Shroud (2), Upper Screen (4), Lightpost Top (1), Propane
Tank Retention Chain (1), Retention Hook (2), Hardware Package
(1) (see pages 8 thru 11 in your owner's manual).
4. Remove lightpost pieces, cabinet base and tank door from box.
Set aside.
5. Remove 6 screws securing grill to burner assembly.
Remove second base half from inside burner assembly. Reattach
grill to burner assembly.
Rear
Base
Front
Base
