background image

MS4464H

 

MS5664H

 

Photographs are not to scale. 

Specifications subject to change 

without prior notice. 

 
 
 
 
 

 

WARNING 

FOR YOUR SAFETY 

 

If you smell gas: 

1.  Shut off gas to the appliance. 

2.  Extinguish any open flame. 

3.  Open barbecue lid or hood. 

4.  If  odour  continues,  discontinue  use  and  contact 

your local dealer. 

FOR YOUR SAFETY 

 

1.  Do  not  store  or  use  petrol  or  other  flammable 

vapours  or  liquids  in  the  vicinity  of  this  or  any 

other appliance. 

2.  A  gas  bottle  not  connected  for  use  shall  not  be 

stored  in  the  vicinity  of  this  or  any  other 

appliance. 

 

For outdoor use only.

 

 

Read instructions before using the appliance. Failure to follow instructions could 

result in death, serious bodily injury, and/or property loss.

 

 

Warning: accessible parts may be very hot. Keep young children away.

 

 

Do not move the appliance during use.

 

 

Turn off the gas supply at the gas bottle after use.

 

 

Any  modification  of  the  appliance,  misuse,  or  failure  to  follow  the  instructions 

may  be  dangerous  and  will  invalidate  your  warranty.  This  does  not  affect  your 

statutory rights.

 

 

Retain these instructions for future reference.

 

 

Leak  test  annually,  and whenever  the  gas  bottle  is  removed  or  replaced.  Check 

the  hose

 

connections  are  tight  and  leak  test  each  time  you  reconnect  the  gas 

bottle. 

 

For Flare-up control please refer to the ‘OPERATION’ section of this manual. 

Assembly and Operating Instructions for Outback

®

  

Meteor 4S Gas Barbecue and Meteor 6S Gas Barbecue  

2575 

0359 

Summary of Contents for Meteor 4S

























Reviews: