8
Fig. 20
Fig. 21
Maintaining the CL-X
The arm assembly and wall plate may be cleaned with a soft sponge and mild solution of soap and water.
Caution: Be careful not to get water on the electrical connections or the display.
If the Roll Control mechanism becomes loose, use a 10 mm open ended wrench to
tighten the lock nuts on the back of the Mounting Head. Do not overt-tighten, or the
roll control will no longer function. See Fig 20 for lock nut locations.
If the Arm Assembly becomes loose and won’t
maintain it’s position, you can tighten the Arms
at several points. Use the 5 mm (7b) Hex
Wrench as indicated in Fig. 21.
CAUTION: WHEN REMOVING THE DISPLAY MAKE SURE THE HEAD IS
LOCKED IN THE NEGATIVE TILT POSITION, OTHERWISE INJURY COULD
OCCUR.
Negative Tilt
Specifications are subject to change without prior notice.
Every effort has been made to provide accurate and error-free assembly and installation. OmniMount Systems disclaims liability for any diffi-
culties arising from the interpretation of information contained in these instructions. If OmniMount products are used for purposes other than
their original intent, OmniMount, its distributors and retailers shall not be held responsible or liable for injuries or property damage, direct,
indirect, or consequential, which may arise from the inability to use this product safely, properly, and in the manner for which it has been de-
signed and manufactured. Warranty does not apply to products which have been lost, damaged by misuse, abuse, or accident.
Thank you for purchasing an OmniMount product.
PN:1002783—Rev B 7/2005
OmniMount Systems, Inc.
8201 South 48th Street • Phoenix, AZ 85044-5355
1-800-MOUNT-IT • www.omnimount.com
Wishbone Series™
CL-X: Extra-Large Cantilever Mount*
Installation Instructions
Questions? Call 1-800-MOUNT-IT (USA only)
•
Designed for 42” - 63” Flat Panel TV’s
•
Maximum Weight Capacity: 200 lbs. (91 Kg)
•
Heavy Duty Double Arm Design
•
Installation Template Included
•
Integrated Cable management
•
Lift N’ Lock Installation
*Mount Only—Additional Adapter Plate Required
