![background image](http://html1.mh-extra.com/html/oldenbourg-group/visa-lighting-serenity-cb1934/visa-lighting-serenity-cb1934_installation-instructions_3696731001.webp)
#8 GROUND
SCREW
FIXTURE ASSEMBLY
(2) AMBIENT LED STRIPS UP
(1) READING LED STRIPS DOWN
OPTIONAL NIGHT LIGHT DOWN (WHEN APPLICABLE)
UNIVERSAL MOUNTING PLATE
SECURED TO JUNCTION BOX ON WALL
FIXTURE ASSEMBLY,
MINUS HOUSING
TEMPORARY
RESTING HOOKS
TYPICAL FIXTURE
1 Remove mounting plate from fixture assembly. Save #8 ground screw for later use.
2. Level and secure mounting plate to junction box and wall. Screws & J-box by others. Orient the plate so the continuous
flange is at the top and the two "hook" features are at the bottom.
3. With fixture assembly upside down and two obround holes (near the center) toward the wall, hook the fixture assembly on
the temporary rest hooks. Fixture assembly will rest upside down on the hooks against the wall during electrical connections.
4. Make electrical connections per code.
5. Lift fixture assembly off the bottom hooks, flip fixture right side up and hang fixture assembly in place on the mounting plates
top continuous flange. Resecure #8 ground screw back into its original place.
NOTE: FIXTURE ASSEMBLY SHOULD BE
ORIENTED SO THE (2) AMBIENT LED STRIPS WILL BE ON TOP AND THE (1) READING LED STRIP WILL BE ON THE
BOTTOM. NIGHT LIGHT LEDS (WHEN OPTION IS REQUESTED) WILL BE ON THE BOTTOM.
6. Recheck for level and secure fixture to wall with auxilary mounting screws (by others).
Drawing:
761991XX
Rev:
B
Sheet:
1 of 2
Eng:
SLN
Date Drawn:
3/18/2014
INSTALLATION INSTRUCTIONS
Model:
CB1934 HEAD WALL
Fixture Family:
SERENITY
1717 West Civic Drive Milwaukee, WI 53209
414-354-6600
Design Modification Rights Reserved
© Visa Lighting
!
When using electrical equipment, basic safety precautions should always be followed, including the following:
Read all instructions carefully before installing and save for future use.
•
Make sure all connections are in accordance with the National Electrical Code and local regulations.
•
To avoid possible electric shock, be sure the power supply is turned off before servicing or installing the fixture
•
Service should be performed by qualified personnel.
•
These instructions may not cover all details or variations. If additional information is needed, please contact Visa Lighting.
•
Document Description: Installation Instructions for
Serenity Series Luminaires