OKIFAX
®
5700 & 5900
PC Interface Kit Instructions
Kit Contents
• These instructions
• Software License Agreement
• Bi-Directional Cable
• JetSuite Pro software CD
• JetSuite Pro User’s Guide
System Configuration
Required
Recommended
90 MHz Pentium PC
200 MHz Pentium PC
16 M B memory: 32 MB memory
for Windows 98 or NT 4.0
32 MB or more of memory
8 MB of permanent swap file space
(Windows 3.1x)
16 MB of permanent swap file
space (Windows 3.1x)
20 M B of disk space
50 MB of disk space
256 color video driver
256 or more color video driver
Bidirectional parallel printer port
Bidirectional parallel printer port
Operating Systems:
Windows 3.1x
Windows for W orkgroups 3.11
Windows 95
Windows 98
Windows NT 4.0 (Service Pack 3)
Operating Systems:
Windows 95
Windows 98
Instructions
1 Connect the bidirectional cable to the parallel port on the back of the fax
unit.
2 Connect the other end of the cable to the PC.
3 Install the JetSuite software following the instructions in the JetSuite Pro
User’s Guide.
!
If you have any other version of JetSuite software installed, uninstall it
using the JetSuite Uninstall utility before installing the software in
this kit.
Two Com ports must be available for this installation: the defaults are
Com 7 and Com 8.
It is very important that your video driver be configured for at least 256
colors. Failure to do so can cause various problems with printed
output.
Make sure that the parallel port being used for the fax by the computer
is configured for bidirectional communication.
58338201
Oki Data Americas, Inc., 2000 Bishops Gate Blvd., Mt. Laurel, NJ 08054-4620
Tel: (856) 235-2600
FAX: (856) 222-5320 http://www.okidata.com
© 1999 Oki Data Americas, Inc.
