Quick Start Guide
Navigator
Balance
Ohaus Corporation www.ohaus.com
i
Navigator
Balance
Quick Start Guide
PREPARATION FOR USE
Release Shipping Lock under the balance
Rotate the pointer to the unlocked position.
Note:
No shipping lock on Approved models.
Connect Power
Ensure voltage identification label matches local
line voltage. If not, do not connect the unit.
Contact Ohaus or your dealer.
Battery Installation
Install the batteries with polarity as shown in the
battery compartment.
Use the AC Adapter to power the balance
when battery power is not needed.
Connect the AC Adapter plug
to the input jack.
Slide appropriate power
plug for your country onto
the adapter housing.
Connect AC Adapter to
the proper AC supply.
SELECTING THE LOCATION:
Place on a firm, steady surface with sufficient space.
Avoid excessive air current, vibrations, heat sources, or rapid temperature changes.
Adjust the leveling feet so
the bubble is centered
in the circle.
Battery
Cover
Input Jack
