background image

UNPACKING

After unpacking unit, inspect carefully 
for any damage that may have occurred 
during transit. Check for loose, missing, or 
damaged parts. If any damage is observed, 
a shipping damage claim must be filed with 
carrier.  Do not use Manual Fluid Extractor 
if broken, bent, cracked or damaged parts 
(including labels) are noted.  Any Manual 
Fluid Extractor that appears damaged in 
any way, operates abnormally or is missing 
parts should be removed from service 
immediately.  If you suspect that the Manual 
Fluid Extractor was subjected to a shock 
load (a load that was dropped suddenly, 
unexpectedly, etc.) immediately discontinue 
use until it has been checked by a factory 
authorized service center.

Please read and save these instructions. Read through this owner’s manual carefully before using product. Protect 
yourself and others by observing all safety information, warnings, and cautions. Failure to comply with instructions 
could result in personal injury and/or damage to product or property. Please retain instructions for future reference.

The following safety information is provided as guidelines to help you operate your Manual Fluid Extractor under 
the safest possible conditions. Any tool or piece of equipment can be potentially dangerous to use when safety 
or safe handling instructions are not known or not followed. The following safety instructions are to provide the 
user with the information necessary for safe use and operation. Please read and retain these instructions for the 
continued safe use of your service system. Failure to follow instructions listed below may result in serious injury. 
In addition, make certain that anyone that uses the equipment understands and follows these safety instructions 
as well.

Operating Instructions and Parts Manual 

24397

07/14

2014 ©OEM-TOOLS

FOR CUSTOMER SERVICE

Technical Question?

 

CALL 1-866-458-2472

[email protected]

MANUAL FLUID EXTRACTOR

Explanation of Safety Signal Words

: Indicates a potentially hazardous 
  situation which, if not avoided, could result in death or serious injury.
: Indicates a potentially hazardous  
  situation which, if not avoided, could result in death or serious injury.

CAUTION          

: Used without the safety alert symbol indicates a potentially hazardous situation  

 which, if not avoided, may result in property damage. 

Notes               

: Provide clarity and helpful information.

CAUTION

WARNING

WARNING

Summary of Contents for MANUAL FLUID EXTRACTOR










Reviews: