FLEX-C
(NV-FLXLK-C)
• Paired with FLEX24, FLEX8 or FLEX-Base
• Up to 30W PoE
FLEX-C Adapter Applications
10/100Mbps (full duplex, symmetrical) & PoE+ over multi-pair UTP with 2,000ft (610M) reach.
NV-FLXLK-BSE
*
NV-FLXLK-C
NV-FLXLK-C
Standard PoE Switch
NV-FLX-024/NV-FLX-08
Multi-Pair UTP Cable
up to 2,000ft (610m)
Multi-Pair UTP Cable
up to 2,000ft (610m)
To Application
1 2 3 4 5 6 7 8
WE
3519
11
7
15
17
13
21
23
19
27
29
25
33
35
31
39
41
37
45
47
43
462
10
12
8
16
18
14
22
24
20
28
30
26
34
36
SFP+1
SFP+2
SFP 1
SFP 2
32
40
42
38
46
48
44
Reset
24
22
20
18
16
14
12
10
8
6
4
2
23
21
19
17
15
13
11
9
7
5
3
1
RUN
ALARM
FAULT
IP ENDPOINT
IP ENDPOINT
FLEX-Base
Long Reach PoE over UTP
FLEX-C Quick Install Guide
The FLEX-C adapter enables extended Ethernet and PoE reach beyond traditional distances
using 1, 2 or 4 pair UTP infrastructure. When paired with the FLEX24 Switch, FLEX8 Switch or
FLEX-Base Extender, the adapter delivers 10/100Mbps, symmetrical full duplex. The FLEX
offering is designed specifically to enable easy deployment over Multi-Pair UTP for reaches
beyond that of standard Ethernet eliminating the costs and disruption associated with IDF
closet requirements.
Link
Activity
Activity
Link/Speed
Green:
100Mbps
Orange:
10Mbps
To Endpoint
To LRE
(Long Reach Ethernet)
1. Remove the FLEX-C from its packaging.
2. Must ensure cable is properly terminated before connecting any FLEX product.
3. Remove all legacy equipment from the UTP cable infrastructure.
NOTE:
In order to avoid damage to endpoints, it is important that non-IP devices are not
connected when you connect the FLEX-C.
4. Connect the Network Infrastructure cable from the FLEX24 switch, FLEX8 switch or
FLEX-Base to the FLEX-C (LRE side).
5. Using CAT5 or higher category cable, connect the endpoint to the FLEX-C (Endpoint side).
NOTE: FLEX-C can be used with FLEX24 switch, FLEX8 switch or FLEX-Base
Endpoint device must be IEEE 802.3 af/at compliant.
888.901.3633 | +44 (0) 208 977 6614
www.nvtphybridge.com
Copyright 2019 NVT Phybridge
445-0017-A
*Base Extender can be powered locally for use with non-PoE switches.
