![background image](http://html1.mh-extra.com/html/nuheat/rpst/rpst_manual_1716573001.webp)
WARNING: Electrical Device
In order to ensure proper operation and prevent shock
or fire, all products must be installed correctly. Read all
warnings and follow all installation instructions.
Ground-fault equipment protection must be used to
minimize the danger of fire from sustained electrical
arcing if the heating cable is damaged or improperly
installed and to comply with Nuheat requirements,
agency certifications and national electrical codes.
Conventional circuit breakers may not stop arcing.
Do not substitute parts or use electrical tape.
Component approvals and performance characteristics
are based on Nuheat specific parts only. Substitution
will void approvals, warranties and performance claims.
The heating cable core is conductive and can short if
not properly insulated and kept dry.
Heating cable core bus wires can overheat and short
when damaged. When cutting the cable jacket or core,
do not break bus wire strands.
Component and heating cable ends must be kept dry
before and during installation.
Fire-resistant thermal insulation materials should be used.
For use with Nuheat R8P5, R13P8 and 13FP cables.
Rated: 277 V; Max: 50A
Maximum continuous exposure temperature: 65˚C (149˚F)
www
.nuhea
t.com
Assembled in Canada
1.800.778.W
ARM
(9276)
Nuheat Freeze
Protection Products
BEFORE YOU START:
• Read through entire installation instructions prior to
beginning installation.
• All instructions available at www.nuheat.com
•
DO NOT
install Nuheat Freeze Protection products in
direct contact with combustible surfaces or materials.
•
DO NOT
rest a hot heat gun on any Nuheat Freeze
Protection Products.
•
DO NOT
make any modifications to Nuheat Freeze
Protection Products while connected to power.
• THIS HEATING PRODUCT SHOULD ONLY BE
INSTALLED BY QUALIFIED PERSONNEL WHO ARE
FAMILIAR WITH THE CONSTRUCTION AND OPERATION
OF THE APPARATUS AND RISKS INVOLVED.
• THE INSTALLATION OF THIS HEATING PRODUCT
SHALL BE IN ACCORDANCE WITH THE
MANUFACTURER’S INSTRUCTIONS AND REGULATIONS
OF THE AUTHORITY HAVING JURISDICTION.
N
uhe
at
W
eathe
r-Re
ad
y H
eat
T
ra
ce
SP
LIC
E/
TE
E K
IT
M
OD
EL
#:
RP
ST
PA
RT
#:
OC
00
62
DE-ICING
AND SNOW MEL
TING EQUIPMENT 3YH6
PIPE HEA
TING CABLE 4YM1
DA
TE OF MANUF
ACTURE