High Definition Sound Bar
Optical
Cable
Screws and Brackets
for Wall Mounting
Remote
Control
Sub-Woofer
AC cable
Subwoofer
Home Theatre System
NK12
USE THE HDMI IN TV (ARC)
SUBWOOFER LOCATION
HELP & TROUBLESHOOTING
QUICK START GUIDE
IMPORTANT SAFETY INFORMATION
PACKAGE CONTENTS
Your Sound Bar is designed and manufactured to operate within defined design limits, and misuse may result in electric shock or fire. To
prevent your Sound Bar from being damaged, the following rules should be observed for its installation, use, and maintenance. Please read
the following safety instructions before operating your Sound Bar. Keep these instructions in a safe place for future reference.
• To reduce the risk of electric shock or component damage, switch off the power before connecting other components to your Sound Bar.
USING THE REMOTE
Tip: For best results, point the remote at the
right side
of the sound bar where the LCD indicator is
located. The sensor is located there.
If your remote stops responding, you may need to replace the battery. To replace the battery, open the
battery compartment, and then replace the old battery with a new CR2025. Be sure that the + sign on
the battery is facing up.
There is no power.
• Press the POWER button on the remote control or on the side of your Sound Bar.
• Ensure the power cord is securely connected.
• Plug a different device into the electrical outlet to verify that the outlet is working correctly.
• To conserve power, the Sound Bar will be in standby mode automatically after 30 minutes if not in use.
There is no sound.
• Increase the volume, Press
Volume Up
on the remote control or on the side of your Sound Bar.
• Press MUTE on the remote to ensure the Sound Bar is not muted.
• Select a different input source (HDMI In TV (ARC), AUX, Line-in, Optical or Bluetooth).
• Be sure the audio cable coming from the TV is connected to an
audio output
, not an audio input.
• If listening to an Digital source, be sure the source is set to PCM.
I hear buzzing or humming.
• Ensure all cables and wires are securely connected.
• Connect a different source device (TV, Blu-ray player, etc.) to see if the buzzing persists. If it does not, the problem
may be with the original device.
• Connect your device to a different input on the Sound Bar.
Place the wireless subwoofer anywhere in the room. For the best sound,
place the subwoofer near a wall or corner within 20 feet (6 meters) of the
sound bar on the same side of the room as the sound bar. The wireless
subwoofer range is 25 feet (8 meters).
PULL OUT THE PLASTIC
SHEET BEFORE USING.
RCA Cable
Press to switch the sound bar ON
and OFF.
Press to adjust the brightness of
the LED display indicator.
Press to select HDMI-IN TV (ARC)
Digital input source.
Press to select AUX-IN (RCA)
Analog input source.
Press to select AUX-IN (3.5mm)
Analog input source.
Press to select OPTICAL Digital
input source.
Press to select Bluetooth input
source.
Mute. Press to turn the sound on or off.
Select the MOVIE EQ effect.
Select the NEWS EQ effect.
Select the MUSIC EQ effect.
Select the SPORTS EQ effect.
In Bluetooth mode, Press to enter pairing
or Bluetooth reset mode.
Press to set a time to switch device off.
(90 mins,60 mins,
3
0 mins,15 mins or OFF)
Volume Up. Press to increase overall
system volume.
Volume Down. Press to decrease
overall system volume.
In Bluetooth mode, press to control
music to PREVIOUS track.
In Bluetooth mode, press to control
music PLAY or PAUSE.
In Bluetooth mode, press to advance
music to NE
X
T track.
The ARC (Audio Return Channel) function allows you to send audio from your ARC- compliant TV to your sound bar through
a single HDMI connection. To enjoy the ARC function, please ensure your
TV is both HDMI-CEC and ARC compliant
and
set up accordingly. When correctly set up, you can use your TV remote control to adjust the volume output (VOL +/- and
MUTE) of the sound bar.
-
Ensure to use an HDMI cables that can support the ARC function.
- HDMI-CEC will be called different names
by different manufacturers - please refer to
your owner’s manual for details on setting
up HDMI-CEC and ARC.
Connect the HDMI cable from your
sound bar’s HDMI In TV (ARC) socket
to the HDMI (ARC) socket on your
ARC- compliant TV. Then press the
remote to select TV-HDMI.
TV
HDMI (ARC)
HDMI cables
(not included)
*Cables may vary slightly from those shown.
