This guide provides a brief overview on testing your blood glucose. For more detailed information on complete blood
glucose testing procedure, consult “Testing Your Blood” section in the Owner’s Booklet. For assistance using your blood
glucose System, call our Customer Care Department at 1-800-803-6025.
© 2011 Nipro Diagnostics, Inc. TRUE2go, TRUEtest and the Nipro Diagnostics logo are
trademarks of Nipro Diagnostics, Inc. F4NPD08 Rev. 22
Blood Glucose Testing
Wash your hands with
warm, soapy water.
1
Remove Test Strip from vial and
close vial immediately. Insert Test
Strip into Test Port with TRUEtest™
facing up. The Meter turns on.
2
Lance your finger.
3
Hold Meter in a vertical position
with Test Strip facing down. Press
strip release button to discard the
used Test Strip from the Meter.
6
4
In as little as 4 seconds,
glucose result will be
displayed.
5
www.niprodiagnostics.com
Checking Your
Blood Glucose
Using TRUE2go
®
A guide for testing
your blood glucose
Simple Steps to
Test Your Blood Glucose
Meter, Test Strips & System Components
Test Strip
Display
Test
Port
Test Port
Contact End
(TRUEtest™ name
facing up)
Sample End
(Tip)
Top View
Front View
Strip
Release Button
Allow a blood drop to form,
touch Tip of Strip to top
of blood drop and allow
blood to be drawn into
Strip. Remove Test Strip
Sample Tip from sample drop
immediately after dashes
appear across Meter Display.
CAUTION! Holding the Test Strip Sample Tip
to the blood sample too long after the Meter
begins testing may cause inaccurate results.
Scan this code with your smart phone
for additional TRUE2go information.
Always refer to the Owner’s Booklet
for detailed product information.
WARNING!
NEVER reuse Test Strips. NEVER wipe test Strips with water, alcohol or any cleaner. DO NOT attempt to remove blood or
control sample from Test Strips or clean Test Strips and re-use. Reuse of Test Strips WILL cause inaccurate results. NEVER add a
second drop of sample to the Strip. Adding more sample gives an error message.
137829-F4NPD08r22.indd 1
10/6/11 10:22 AM
