![background image](http://html1.mh-extra.com/html/nintendo/gamecube-dol-101/gamecube-dol-101_manual_1695517001.webp)
GCLoader PNP Installation for DOL-101 & DOL-001 GameCube (All Regions)
Tools Needed:
•
Gamebit 4.5mm security screwdriver (NTSC-U, PAL Units Only)
•
Philips Screwdriver size no. 1
Step 1
Remove the 4 security screws shown with arrows using a game bit driver. *Some consoles use normal
Phillips screws.
Step 2
Remove the back plate and front plate. Gently pull the flex cable at the arrow location.