Quick Start Guide for Toucan N Series
#QG2000N01 v1.0 Sep 23 2015
More information: Please visit
www.nimblewireless.com
Email: [email protected]
Toucan N Series Quick Start Guide
Step 1: Charging and installing the device
The Toucan N Series is charged through the micro USB port as shown below. Please ensure that the
USB wall adaptor can source 5V/500mA to meet the power requirements of the Toucan device. The
charging LED indicator will glow while the device is charging. Once charging is complete (approx. 4-5
hours) the LED will turn off indicating that charging is complete. Once the device is charged, it is now
ready for use.
Step 2: Activating the devices
If the devices come pre-activated by Nimble, you do not have to do anything and you can proceed to
step 3. If not, please contact your air-time service provider to activate the device by providing the MEID
listed on the device label. Once you get confirmation that the device is activated, please power the unit
using the supplied USB cable and USB wall adaptor and leave it powered for 24 hours. The device will
automatically activate itself over the air without any user intervention. Please place the device such that
the top side of the device is facing open sky.
Step 3: Using IRIS Monitoring application and locating the device
IRIS is Nimble’s web based monitoring application to monitor your assets temperature and locate your
assets/devices. To set up your IRIS account, please contact [email protected]. You
can login into the IRIS application at http://iris.nimblewireless.com and locate/track your assets/devices.
Please refer to the IRIS User guide provided at IRIS set up for further instructions on how to login and use
IRIS application.
Charging Status
Power on
On-demand SOS
button
Micro USB
Charging Port
