NT-P100M Quick Start Guide
Connect the Memory Phone to Your PC
1.
Plug the phone into an USB port of your
computer.
2.
Window detects the phone as several new
hardware devices and installs necessary drivers
automatically.
3.
Wait until all drivers are installed.
Window may skip this step if the drivers have
been previous installed on your PC,
Depending on the Window configuration, you may
need to restart your computer after all drivers are
installed.
4.
After the installation is completed. select
Run the
program
on the following screen and click
OK
.
STEP 1
Knowing Your Memory Phone
Key arrangement
Scroll
LCD Screen
IN
OUT
Dial
Cancel
Numeric Keypad
End
“+” for SkypeOut
Select Ring tone
5.
The SkyMagic software is now loaded and the
phone will sound a beep and the following screen
will pop up.
6.
Then, the Skype software will start loading. Wait
until the Skype login screen displays.
STEP 1 - Continue
All software and device drivers are pre-loaded in the
phone’s built-in flash memory. No software installation is
needed.
1.
Simply plug it into an USB port of a computer.
2.
Wait until the computer finishes loading the software.
3.
Start using the phone.
Make sure your computer is connected to the
Internet and is running Window XP or Window 2000
(SP4)
Before You Start
