background image

NEC VersaBay IV Drive   1

NEC Versa

VersaBay IV Drive

Congratulations on purchasing an NEC

®

 VersaBay™ IV drive for your NEC Versa

®

 notebook

computer! Use this document if you have one of the following VersaBay IV drives:

!

 

CD-ROM drive

!

 

CD-RW drive

!

 

DVD-ROM drive

!

 

Combination DVD/CD-RW drive

Read this document for information about:

!

 

NEC VersaBay IV drive features

!

 

Removing a device from the VersaBay IV slot

!

 

Installing your new drive in the VersaBay IV slot

!

 

Finding further information about your NEC VersaBay IV drive

Note   

For details on installing any software that ships on CD with your drive, see the sheet(s)

packaged with the CD.

NEC VersaBay IV Drive Features

See the following figures for feature locations on NEC VersaBay IV drives. Features are
described after the figures. (Note: your drive may look slightly different, or have slightly
different features.)

Typical CD-ROM drive features

A

 – VersaBay IV Drive

D

 – Emergency Eject Hole

B

 – Drive Status LED

E

 – Device Latch/Eject Button

C

 – Disc Eject Button

Typical DVD-ROM drive, CD-RW drive, or

combination DVD/CD-RW drive features

A

 – VersaBay IV Drive

D

 – Emergency Eject Hole

B

 – Disc Eject Button

E

 – Device Latch/Eject Button

C

 – Drive Status LED

Summary of Contents for VERSABAY IV DRIVE

Page 1: ... NEC VersaBay IV drive Note For details on installing any software that ships on CD with your drive see the sheet s packaged with the CD NEC VersaBay IV Drive Features See the following figures for feature locations on NEC VersaBay IV drives Features are described after the figures Note your drive may look slightly different or have slightly different features Typical CD ROM drive features A Versa...

Page 2: ... slot as follows 1 If a VersaBay IV device is in the slot use the Phoenix BaySwap utility or power off the system See your printed user s guide for information about the Phoenix BaySwap utility If a VersaBay IV weight saving module is in the VersaBay IV slot skip to step 2 If you plan to hot swap a VersaBay IV battery and the system is not connected to an AC power source verify that the primary ba...

Page 3: ... For information on hot swapping or warm swapping devices see the information about the Phoenix BaySwap utility in your printed user s guide 2 Locate the NEC VersaBay IV release latch to the right of the VersaBay IV slot 3 Flip the latch to the open position 4 Align the drive in the NEC VersaBay IV slot and push it in until it fits securely into the bay Inserting an NEC VersaBay IV drive 5 Press t...

Page 4: ... instructions for installing configuring or launching the software those instructions are published in a separate document Information in this publication is subject to change without notice NEC is a registered trademark and Versa is a U S registered trademark of NEC Corporation and or one or more of its subsidiaries Both are used under license Microsoft and Windows are registered trademarks of Mi...

Reviews: