background image

USE AND CARE GUIDE

FLOOD LIGHT

MODEL # NEB_LSP_0008

A

Light Body (1)

B

Connector Clip (1)

C

Ground Stake (1)

1. Preparation

 

•  Before beginning assembly of product, make sure all parts   

 

  are present. Compare parts with package contents list. If    

 

  any part is missing or damaged, do not attempt to assemble  

 

  the product.

 

•  Estimated installation time: 10-15 minutes.

 

•  No Tools Required for Assembly.

 

2. Assembly

 

•  Screw together the light body (A) and the ground stake (C)    

 

  as shown above. Ensure the wire goes through the center  

 

  of the stake.

 

3. Installation

 

•  Determine the location of your light. Dig a small starter hole  

 

  in the ground with a screw driver or trowel.

 

•  Press the stake into the hole until the light is secure, but  

 

  can still be adjusted.

 

•  Dig a small trench from the light to the transformer wire.

 

•  Secure the connector clip (B) to the transformer wire, as  

 

  shown above.

 

•  Test the connection by turning on the lights. Make any  

 

 

  desired adjustments.

 

•  Secure the light in the ground and fill in the trenches  

 

  with dirt.

A

C

B

ASSEMBLY AND INSTALLATION

WARNING: 

Never use a hammer to insert the light into the ground.

WARNING: 

The wire connector (B) contacts have sharp edges for piercing the 

main low voltage cable. To avoid injury, do not touch the metal contacts.

CAUTION: 

The wire from low voltage power unit should be 12-18 AWG type 

underground Low Energy Circuit Cable.

IMPORTANT: 

•   Do not submerge the fixture in water.

•   Do not install the fixture within  

 

10 ft. of water.

• 

The landscape wire can also be  

 

hidden under surface.

• 

Protect the wiring by routing it in  

 

close proximity to the light fixture,  

 

or next to a building structure.

(Power Pack Sold Separately)

Reviews: