HD-SERIES
ENGLISH
Thank you for purchasing the My Weigh HD Series heavy duty shipping scale. This scale is designed to provide years of accurate
weighing. Please read this entire manual before use. If you have any questions about your scale or have troubleshooting con-
cerns, please visit our
website at www.MyWeigh.com.
SPECIFICATIONS
Model HD150
HD300
Capacity
68kg/150lb 136kg/300lb
Accuracy
0.02kg/0.05lb 0.05kg/0.1lb
POWER SUPPLY
The HD Series scale is designed to run with 6.0V / 100 mA AC power (ac adapter included) or optional 4x AA batteries. The AC
adapter plugs into the socket on the rear of the scales weighing indicator. If you want to use batteries, please install them in the
battery compartment on the underside of the base of the scale.
Battery Installation
For battery installation, turn over the scale, you’ll see the battery compartment on the underside of the base of the scale , lift
and open (see the enclosed drawing Fig1) the battery cover, remove and/or install the batteries. Be sure that the batteries are
installed correctly following the polarity indicators in the battery compartment. Reinstall the battery cover.
OPERATION INSTRUCTIONS
on the scale. Either place the remote display box together with the scale on its surface or mount the display box on a wall at a
suitable height with the included wall mounting kit.
Weighing Procedures
Press the
key to turn on the scale, the display will show “150.00lb” for the HD150 shipping scale or“300.0lb” for the HD300
shipping scale. When the display will shows ”0.00” thhe scale is now ready for use. To begin weighing, follow these steps:
1. Press and release the
2. Press the
[M]
key to change the weighing unit between “lb” and “kg”.
3. Press the
[T]
key to TARE or Zero the scale.
4. Press the
[D]
key to transmit the data through the USB port.
This document hosted by: www.oldwillknottscales.com