Instruction Sheet
Subject: Installations Instructions
Air Compressor Kits
1 of 9
Part Number 020006402 12/2014
MULTIPLEX
2100 FUTURE, SELLERSBURG, IN 47172
800-367-4233
WWW.MANITOWOCBEVERAGE.COM/US
Importar
Read the following warnings before beginning an
installation. Failure to do so may result in possible death
or serious injury.
n
Wtoaiag
Tp Avpid Seoipus ajuoy
DO
Adhere to all National and Local Plumbing and
Electrical Safety Codes.
DO
Turn “off” incoming electrical service switches when
servicing, installing, or repairing equipment.
DO
Check that all flare fittings on the carbonation
tank(s) are tight. This check should be performed with a
wrench to ensure a quality seal.
DO
Inspect pressure on regulators before starting up
equipment.
DO
Protect eyes when working around refrigerants.
DO
Use caution when handling metal surface edges of
all equipment.
DO
Handle CO
2
cylinders and gauges with care. Secure
cylinders properly against abrasion.
DO
Store CO
2
cylinder(s) in well ventilated areas.
DO NOT
Throw or drop a CO
2
cylinder. Secure the
cylinder(s) in an upright position with a chain.
DO NOT
Connect the CO
2
cylinder(s) directly to the
product container. Doing so will result in an explosion
causing possible death or injury. It is best to connect the
CO
2
cylinder(s) to a regulator(s).
DO NOT
Store CO
2
cylinders in temperature above 125°F
(51.7°C) near furnaces, radiator or sources of heat.
DO NOT
Release CO
2
gas from old cylinder.
DO NOT
Touch refrigeration lines inside units. Some
may exceed temperatures of 200°F (93.3°C).
Importar
Water pipe connections and fixtures directly connected
to a potable water supply shall be sized, installed and
maintained in accordance with Federal, State, and Local
codes.
n
Wtoaiag
Dtageo pf Elecroic Shpck
Disconnect and lock out all electrical power sources
before performing service or maintenance on this
machine — except when electrical tests are being
performed by qualified service personnel.
