RAPIDDOC™ SMARTBACK USER GUIDE
1
MTI P/N 063-00215 rev A ©2018 MTI All Rights Reserved
www.armoractive.com | T: 801.653.3807
1
2
4
3
RAPIDDOC™ SMARTBACK
Lift the existing battery cover by pulling the notch on the
lower left corner and completely remove it.
Place the RapidDoc SmartBack into the battery opening.
Make sure that the arrow on the inside of the SmartBack
points to the Tablet Camera.
Very carefully secure the SmartBack to the tablet,
applying light force to the Hex Key to tighten the 4
corner screws.
Adjust hand strap to desired tightness.
If you have access to a torque screw-driver, Aava recommends
setting the driver to 1.23 inch-pounds of torque, or 14
newton centimeters.
NOTES BEFORE INSTALLING:
Do not overtighten screws. Using excessive force when tightening screws can damage the threads on
devices and damage product.
SmartBack
without
Accessory Dock
185-00224
Hex Key
Hex Screws
SmartBack
with
Accessory Dock
185-00513
