– 1 –
– 2 –
– 3 –
P/N: 1802001220010
MPC-122-K
Quick Installation Guide
First Edition, December 2010
1.
Overview
The MPC-122-K marine panel computers feature a 2.26 GHz Intel
Core 2 Duo processor with up to 4 GB of system memory, providing
high performance for system operation. The MPC-122-K
computers have 2 RS-232/422/485 serial ports for reliable serial
communications, and 2 Gigabit LAN ports for high speed Ethernet
transmission and network redundancy. Features easily accessed
from the computer’s panel include full range dimming, optical
bonding, wide viewing angle, and color calibration.
2.
Package Checklist
Before installing the MPC-122-K, verify that the package contains
the following items:
•
1 MPC-122-K panel computer
•
PS/2 to KB/MS Y-type cable
•
2 sets of hard disk drive cables and 1 set of SATA disk power
cables
•
Rubber water proofing cushion
•
Hard disk drive ground sticker
•
Documentation and software CD
•
Quick installation guide (printed)
•
Warranty card
Note: Please notify your sales representative if any of the above
items are missing or damaged.
3.
MPC-122-K Panel Layout
U
Bottom View
Computer
Panel
U
Side and Front Views
Panel
Menu Botton
USB Port with
Water-proof Cover
Adjustment Button
Computer
Panel
U
Computer
Power Input
CompactFlash
Card Socket
Power Switch PS/2
Audio Output/Input
Gigabit Ethernet
Port x 2
USB 2.0
Host x 6 DVI-D/VGA Output
Serial Port x 2
(RS-232/422/485)
Antenna Hole
(reserved)
LED Indicators
(Storage, Power)
U
LED Indicators
The following table describes the LED indicators located on the
front panel of the MPC-122-K.
LED Name LED Color
LED Function
Green
Power is on and functioning normally
Power
Off
Power is off or power error exists
Yellow (on) CF card is inserted and detected
Yellow
(blinking)
Data is being read from or written to
the CF card or HDD
Storage
Off No
activity
Green
100 Mbps Ethernet mode
Yellow
1000 Mbps (Gigabit) Ethernet mode
LAN
Off
No activity or 10 Mbps Ethernet mode
4.
Installing the MPC-122-K
U
Wall or Cabinet Mounting
There are four screw holes on each side of the panel. Place the
rubber water proofing cushion on the back of the panel, and then
use two screws per side to attach the MPC-122-K to a wall or
cabinet.
Screws
Screws
5.
Panel Adjustment
There are two buttons located in the right bottom corner of the
panel. Click the Menu Button to access panel adjustment items,
and then use the arrows or the Adjustment Button for each
configuration. Select Exit or push the button to close the
configuration menu.
6.
Connector Description
U
Power Connector
The MPC-122-K has an 18 to 36 VDC power input located on the
terminal block. The Power LED will light up when power is being
properly supplied. When The Ready LED lights to a solid green, the
OS is ready. When the Ready LED lights to a solid green, the OS is
ready
U
Grounding the MPC-122-K
Grounding and write routing help limit the effects of noise due to
electromagnetic interference (EMI). Run the ground connection
from the ground screw to the grounding surface prior to connecting
the power.
ATTENTION
This product is intended to be mounted to a well-grounded
mounting surface, such as a metal panel.
