background image

The Specialist In Drum Handling Equipment

Model 400AM-72-114

Hydra-Lift, 72”, Air Power Lift & Tilt

with Spark Resistant Parts

www.morsedrum.com

Copyright 2010 - Morse Mfg. Co., Inc. 

Form PL400M-72-114 (0409-1110)   (Updated 6 Mar, 2018 4:04 PM)

 

1

Contents

Page

Receiving Procedures. . . . . . . . . . . . . . . . .  1

Warranty. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  1

Safety Information. . . . . . . . . . . . . . . . . . . . .  1 - 2

Machine Description. . . . . . . . . . . . . . . . . . .  3 - 4

Operating Instructions. . . . . . . . . . . . . . . . . . .   4 - 5

Maintenance. . . . . . . . . . . . . . . . . . . . . . . . . .  5

Parts Lists and Diagrams. . . . . . . . . . . . .  6 - 9

Safety Information

While Morse Manufacturing Co. drum handling equipment is 

engineered for safety and efficiency, a high degree of respon

-

sibility must be placed upon the machine operator to follow 

safe practices, based primarily on common sense, upon which 

true safety depends.

Failure  to  follow  the  safety  precautions  in  this  manual  can 

result  in  personal  injury  or  property  damage.  Observe  the 

same precautions as with similar machinery where careless-

ness in operating or maintenance is hazardous to personnel. 

Carefully read the safety precautions below and throughout 

this manual.

Receiving Procedures

Every  Morse  drum  handler  is  inspected  prior  to  shipping. 

However, damage may be incurred during transit.

•  Check  for  visible  damage.  If  you  choose  to  accept  dam

-

aged freight, always sign noting the damage on the 

BILL 

OF LADING

• Document the damage and have the truck driver sign. We 

recommend keeping a digital camera at your receiving dock 

for this purpose.

• Open packages expeditiously to check the condition of the 

goods. There is only a 24 hour window to notify the carrier 

of any concealed damage.

• 

IMMEDIATELY REPORT ALL DAMAGE TO THE SHIPPING 

COMPANY!

 Then you may contact Morse for assistance with 

your freight claim.

• Morse Manufacturing will not be held responsible for any 

damaged freight that is not signed for as damaged.

Delivery to non-business addresses without a loading dock 

result in additional freight charges. Residential delivery fees, 

inside delivery fees, re-delivery charges, and lift gate services 
will be added by the truck line, and are non-negotiable.

Limited 2 Year Warranty

Morse drum handling equipment is guaranteed against defects 

in  workmanship  or  materials  for 

TWO YEARS

  when  used 

properly  within  its  rated  capacity.  Warranty  does  not  cover 

wear  from  normal  use  or  damage  from  accident  or  abuse. 

Motors and other purchased parts carry the warranties of their 

manufacturers.

For warranty claims, contact your Morse Dealer to obtain a 

return  authorization  number,  and  for  return  freight  advice. 

Return freight must be prepaid.

In all instances, liability is limited to the purchase price paid 

or to repairing or replacing the product. Customer assumes 

liability  for  any  modifications,  unauthorized  repairs  or  parts 

substitution.

Operator’s Manual 

for Morse Hydra-Lift Drum Karrier

with Spark Resistant Parts

Model 400AM-72-114

Serial Number 0409 to 1110 (MMYY)

Summary of Contents for 400AM-72-114










Reviews: