SRE
4000
TANDEM w/ CROSS MEMBER
I N S TA L L AT I O N I N S T R U C T I O N S
The MORryde X-Factor crossmember kit is designed to provide added strength and reinforcement to trailer frames.
The crossmember can be installed onto a single spring hanger or for added strength and reinforcement onto all of
the spring hangers on the frame. The installation instructions for the kit and the
SRE
4000 are detailed below.
WARNING
The
SRE
4000 suspension system warranty is void if crossmember is not installed.
574.293.1581 • MORryde.com
TOOLS REQUIRED:
• Torque Wrench
• 11/16" Socket & 13/16" Wrench
• 9/16" Socket & Wrench
• 1/2" Socket & Wrench
• Floor Jacks
• Safety Stands
• Ratchet
• Alternate Tools for Reinforced
Frame Hanger: 5/16" Drill Bit & Drill
PARTS LIST:
• Crossmember Half w/ Holes, 2nd Half w/ Slots
• (2)
SRE
4000 Equalizers
• (2) Clamp Strap
• (8) 3/8-16 x 1 Flange Bolt
• (8) 3/8-16 Flange Locknut
• (4) 5/16-18 x 1 1/2 HHCS
• (4) 5/16-18 Locknut
• (2) 7/16-20 x 3.40 Wet Bolt
• (2) 7/16-20 Flange Locknut Shoulder Bolt
