background image

XG0679 - 080321

Installation & Maintenance Manual

•  The installation of this fireplace must be done by a 

qualified and certified gas appliance installer.

•  Check local codes and read all instructions prior to 

installation.

®

C

US

       WARNING:

FIRE OR EXPLOSION HAZARD

Failure to follow safety warnings exactly could result in serious injury, 

death, or property damage.

— Do not store or use gasoline or other flammable vapors and 

liquids in the vicinity of this or any other appliance.

— WHAT TO DO IF YOU SMELL GAS

•  Do not try to light any appliance.
•  Do not touch any electrical switch; do not use any 

phone in your building.

•  Leave the building immediately.
•  Immediately call your gas supplier from a neighbour's 

phone. Follow the gas supplier’s instructions.

•  If you cannot reach your gas supplier, call the fire 

department.

— Installation and service must be performed by a qualified 

installer, service agency or the gas fitter.

RXM40VAC

ON/OFF REMOTE WITH 110V RECEIVER

Read and understand this manual. Improper installation, adjustment, 

alteration, service or maintenance can cause serious injury, property 

damage or even death. For assistance or additional information 

consult a qualified installer, service agency or the gas supplier.

Some materials used in the manufacturing process of this product can 

expose you to Benzene which is known in the State of California to 

cause cancer and birth defects or other reproductive harm. For more 

information go to www.P65warnings.ca.gov

Installation and service must be performed by a qualified installer, 

service agency or the gas fitter.

Installer:

 Leave this manual with the appliance.

Consumer: 

Retain this manual for future reference.

NOTICE

CAUTION

DANGER

WARNING

Summary of Contents for RXM40VAC







Reviews: