RHT-5771 Hand Crimp Tool
Doc No. 64001-4500
Release Date: 10-24-03
UNCONTROLLED COPY
Page 1 of 6
Revision: B
Revision Date: 07-05-06
Hand Crimp Tool
Operating Instruction Sheet and Specifications
Part No. 64001-4500
Eng. No. RHT 5771
(Replaces 19285-0051)
FEATURES
A full cycle ratcheting hand tool ensures complete crimps
An economical tool for portable crimping and field repair
3-nested tool eliminates the need for additional tools
SCOPE
Perma-Seal
Step Down Butt Splices for 14-16 to 18-22 AWG and 10-12 to 14-16 AWG. FIQD Couplers Male and Female for
14-22 AWG.
Testing
Mechanical
The tensile test, or pull test, is a means of evaluating the mechanical properties of the crimped connections. The following charts
show the UL specifications for various wire sizes. The tensile strength is shown in pounds, and it indicates the minimum acceptable
force to break or separate the terminal from the conductor.
UL – 486 A* UL – 486 C** UL*310***
Wire Size (AWG)
Min. Pull
Min. Pull
Min. Pull
22 8 8
8
20 13
10
13
18 20
10
20
16 30
15
30
14 50
25
50
12 70
35
70
10 80
40
80
*UL - 486 A - Terminals (copper conductors only).
**UL - 486 C - Butt Splices
***UL – 310 – Couplers
The following is a partial list of the product part numbers and their specifications that this tool is designed to run. We will be adding to
this list and an up to date copy is available on www.molex.com.
