molex CR5907, Operating Instruction And Specifications Sheet

Page: 1 / 4

CR5907 Hand Crimp Tool for “SPOX” Terminals
Doc No. 11-01-0189 Release Date: 04-13-93
UNCONTROLLED COPY
Page 1 of 4
Revision: C Revision Date: 07-27-04
INSULATION
CRIMP
BRUSH
STRIP
LENGTH
BELL MOUTH
CRIMP HEIGHT
BEND
DOWN
BEND UP
ROLLING
CONDUCTOR
CRIMP
TWISTING
HAND CRIMP TOOL
Operating Instruction and
Specification Sheet
Order No. 11-01-0189
(CR5907)
FEATURES
Œ
Small handle spread which make this style tool ideally suited for end users
Œ
Ratchet with safety release that ensures consistent performance
Œ
A precision user-friendly terminal locator wire stop holds terminals in the proper crimping position
SCOPE
Wire Size Insulation Diameter Strip Length Terminal
Series No.
AWG mm² mm In. mm In.
5103 22 - 28 0.35-0.08 1.20-1.90 .047-.075 2.54-3.17 .100-.125
DEFINITION OF TERMS
The above terminal drawing is a generic terminal representation. It is not an image of a terminal listed in the scope.
CONDITIONS:
After crimping, the conductor profiles should measure the following (see notes on page 3).
Punch Width (Ref)
Wire Size
Cond. Crimp
Height (Ref)
Cond. Ins.
Pull Force Min. Profile Terminal
Series No.
AWG mm
2
mm In. mm In. mm In. N Lb. A B
5103 22 0.35 0.67-0.77 .026-.030 1.45 .057 1.90 .075 44.5 10.00 X
5103 24 0.20 0.66-0.76 .026-.030 1.45 .057 1.90 .075 28.9 6.50 X
5103 26 0.12 0.66-0.76 .026-.030 1.45 .057 1.90 .075 17.8 4.00 X
5103 28 0.08 0.65-0.75 .025-.029 1.45 .057 1.90 .075 11.1 2.50 X