Hand Crimp Tool for Board-In Crimp Terminals
Doc No: ATS-6382569HM
Release Date: 07-25-12
UNCONTROLLED COPY
Page 1 of 6
Revision: A
Revision Date: 07-25-12
INSULATION
CRIMP
▲
SEE NOTE
BRUSH
STRIP
LENGTH
BELL MOUTH
COND.CRIMP
HEIGHT
BEND
DOWN
BEND UP
ROLLING
CONDUCTOR
CRIMP
TWISTING
CUT-OFF TAB
SEAM
Application Tooling
Specification Sheet
Modular Crimp Head
Order No. 63825-6970
Hand Crimp Tool
Order No. 63825-6900
FEATURES
%
A full cycle ratcheting hand tool ensures complete crimps
%
Ergonomically designed soft handles
%
Precisely designed crimping profiles with simple contact positioning
%
Easy handling due to outstanding force ratio
%
Modular Crimp Head is removable and can be use in the Air Powered Tool Order No.63816-0100,
accompanied by Air Powered Crimp Adapter (Order No. 63816-0700).
%
Can also be used in the Battery Powered Tool Order No.63816-0200 (110 V) or 63813-0250 (220 V),
accompanied by Battery Powered Crimp Adapter (Order No. 63816-0600).
SCOPE
Products: 2.50mm Pitch Board-In Crimp Terminal, Male, 20-24 AWG.
Terminal
Series
Terminal Order No.
Wire Size
Insulation Diameter
Wire Strip Length
Reel
Loose
AWG
mm²
mm
In.
mm
In.
50097
50097-8000 50097-8100 20-24 0.50-0.20
1.40-1.90
.055-.075
2.50-3.00 .098-.118
Customer to cut off terminal from reel: 0.01mm (.004”) maximum Cut-off Tab.
See crimp specification for the individual Insulation Diameter.
DEFINITION OF TERMS
This illustration is a generic terminal representation and not an exact image of any terminal listed in the scope.
TYPE 4A
