Page 1 of 5
Modellbahn Digital Peter Stärz
Dresdener Str. 68 – D-02977 Hoyerswerda –
+49 3571 404027 – www.firma-staerz.de – [email protected]
ROCO-Adapter
for the Turning Platform Module DSM-PIC
DSM-PIC-R
v1-2014
Degree of difficulty:
easy
medium
difficult
Necessary skills:
- Simple assembly and soldering procedure of the board
The ROCO-Adapter DSM-PIC-R is an adapter module for con-
necting turning platforms of the brand ROCO to the Turning
Platform Module DSM-PIC.
It is a pure accessory module and can only be used together
with the Turning Platform Module DSM-PIC.
In combination with the Turning Platform Controller DSM-PIC-
H it is then possible to steer the turning platform via pre-
selection of the position. Alternatively the steering can be
done via the SX-Bus.
A modified PIC is delivered for the Turning Platform Module
DSM-PIC to match with the ROCO turning platform.
Special features
- Especially for connecting turning platforms of ROCO
- No modification of the turning platform required
- Easy wiring
Table of content
Special features ............................................................................1
Technical specifications ................................................................2
Compatibility............................................................................. 2
Kit contents ...................................................................................2
Maintenance and care...................................................................2
Assembly instruction .....................................................................2
Component layout diagram on the PCB .................................... 2
Populated PCB ......................................................................... 2
Bringing into service......................................................................2
Description of operation ................................................................3
Jumper JP1 .............................................................................. 3
Solder bridges and sliding contacts........................................... 3
Terminal X3 .............................................................................. 3
Connecting to the Turning Platform Module DSM-PIC .............. 3
Connecting to the turning platform of ROCO............................. 3
Connection scheme: ROCO turning platform with occupancy
detector .................................................................................... 4
Connecting a reed-contact or a Hall sensor (optional)............... 4
Parameters and Programming ......................................................4
Overview of settings ................................................................. 4
Steering the Turning Platform Module ...........................................5
