, inc.
Mincey Marble Mfg., Inc.
1940 New Harvest Road
Gainesville, GA 30507
Ph: 800.533.1806
Fx: 770.531.0935
www.minceymarble.com
MATERIALS / TOOLS NEEDED CHECKLIST
PRE-INSTALLATION PIECES / PARTS LIST
ENCLOSURE SYSTEM INSTALLATION
Installation Instructions for Mincey Marble Manufacturing’s
Brunswick Bow Front Shower Enclosures
ATTENTION: Prior to starting the installation, please read through these instructions. This
will help avoid any unneccesary breakage. Any breakage due to handling or installing this
enclosure system is the responsibility of the installer and is not covered under the Mincey
Warranty. Mincey recommends that two people are used to install this shower enclosure
system due to the weight and fragility of the glass panels. Mincey also recommends that
you protect the glass, especially the bottoms, and shower pan during installation.
These installation instructions apply to the Mincey Brunswick Bow Front Shower Enclosure System. In these
instructions we are going to use an example with a 60” wide shower with the door opening on the right.
All Drawings Are Not To Scale.
6WDUWE\XQFUDWLQJWKHPDWHULDOVDQGFRQ¿UPWKDWDOORIWKHSDUWVDQGSLHFHVDUHSUHVHQW
The
Required Tools are listed below. The contents of the Hardware Kit are listed below. The Parts Diagram is on the
following page. Before you begin the installation, make sure that all of the pertinent surfaces are clean and free
of dust, debris and any shavings. After you perform any drilling, you will want to make sure the surfaces are
clean again - this includes the Shower Pan and the Shower Panel Walls.
MATERIALS / TOOLS NEEDED
INCLUDED WITH THE ENCLOSURE
WALL
ANCHORS
QTY: 6
1/2”
SCREWS,
QTY: 8
DRILL (CORDED OR CORDLESS),
5/16” MASONRY DRILL BIT,
1/8” METAL DRILL BIT
TAPE MEASURE
PENCIL
LEVEL
CAULK GUN,
100% SILICONE
RUBBER MALLET
HACK SAW
PHILLIPS HEAD SCREWDRIVER
TOP & BOTTOM
FGP CLIPS
QTY: 2
TOP
ROLLER
QTY: 2
BOTTOM
ROLLER
QTY: 2
DOOR STRIKE
WALL JAMB
QTY: 1
DOOR PULL
QTY: 1
TOWEL BAR
QTY: 1
HEADERS &
FOOTERS QTY: 2
SLIP-ON VERTICAL
WALL JAMBS QTY: 2
DOOR STOPS
QTY: 2
FGP BUBBLE
SEAL QTY: 2
F SEAL
QTY: 2
VERTICAL WALL
JAMB COVER TRIM
QTY: 2
JAMBS TOP
COVERS QTY: 4
1 1/4”
SCREWS,
QTY: 8
1 3/4”
SCREWS,
QTY: 6
