Milwaukee L4 PPS, Manual

Page: 1 / 4

WARNING
3.
4.
1.
2.
9.
10.
11.
12.
13.
5.
6.
7.
8.
15.
USB RECHARGEABLE PORTABLE POWER SOURCE
AND CHARGER
THIS MANUAL CONTAINS IMPORTANT SAFETY
AND OPERATING INSTRUCTIONS FOR THE
REDLITHIUM
®
USB CHARGER CAT. NO. L4 PPS
AND BATTERY CAT. NO. L4B2.
CHARGE ONLY REDLITHIUM
®
USB BATTERIES IN
THE REDLITHIUM
®
USB CHARGER. OTHER TYPES
OF BATTERIES MAY CAUSE PERSONAL INJURY
AND DAMAGE.
BEFORE USING THE BATTERY AND CHARGER,
READ THIS OPERATOR’S MANUAL, YOUR TOOL
OPERATOR’S MANUAL, AND ALL LABELS ON THE
BATTERY, CHARGER AND TOOL.
USE ONLY WITH LISTED/CERTIFIED ITE POWER
SUPPLY. Others may result in a risk of fire, electric
shock or personal injury.
AVOID DANGEROUS ENVIRONMENTS. Do not
charge battery in rain, snow, damp or wet locations. Do
not use battery or charger in the presence of explosive
atmospheres (gaseous fumes, dust or flammable
materials) because sparks may be generated when
inserting or removing battery, possibly causing fire.
CHARGE IN A WELL VENTILATED AREA. Do not
block charger vents. Keep them clear to allow proper
ventilation. Do not allow smoking or open flames near
a charging battery. Vented gases may explode.
MAINTAIN CORD. When unplugging charger, pull plug
rather than cord to reduce the risk of damage to the
electrical plug and cord. Never carry charger by its
cord. Keep cord from heat, oil and sharp edges. Make
sure cord will not be stepped on, tripped over or
subjected to damage or stress. Do not use charger with
damaged cord or plug. Have a damaged charger
replaced immediately.
USE ONLY RECOMMENDED ATTACHMENTS. Use
of an attachment not recommended or sold by the
battery charger or battery manufacturer may result in a
risk of fire, electric shock or personal injury.
TO REDUCE THE RISK OF ELECTRIC SHOCK,
always unplug charger before cleaning or
maintenance.
DO NOT BURN OR INCINERATE BATTERY PACKS.
Battery may explode, causing personal injury or
damage. Toxic fumes and materials are created when
battery are burned.
DO NOT CRUSH, DROP, OR DAMAGE battery. Do
not use a battery or charger that has received a sharp
blow, been dropped, run over, or damaged in any way
(e.g., pierced with a nail, hit with a hammer, stepped
on).
DO NOT DISASSEMBLE. Incorrect reassembly may
result in the risk of electric shock, fire or exposure to
battery chemicals. If it is damaged, take it to a
MILWAUKEE
®
service facility.
BATTERY CHEMICALS CAUSE SERIOUS BURNS.
Never allow contact with skin, eyes, or mouth. If a
damaged battery leaks battery chemicals, use rubber
or neoprene gloves to dispose of it. If skin is exposed to
battery fluids, wash with soap and water and rinse with
vinegar. If eyes are exposed to battery chemicals,
immediately flush with water for 20 minutes and seek
medical attention. Remove and dispose of
contaminated clothing.
IMPORTANT SAFETY INSTRUCTIONS
READ AND UNDERSTAND ALL
INSTRUCTIONS. Failure to follow all
instructions listed below, may result in electric shock, fire
and/or serious personal injury.
SAVE THESE INSTRUCTIONS
DO NOT SHORT CIRCUIT. A battery pack will
short circuit if a metal object makes a connection
between the positive and negative con-tacts on the
battery pack. Do not place a battery pack near
anything that may cause a short circuit, such as
coins, keys or nails in your pocket. Do not allow
fluids to flow into battery pack. Corrosive or
conductive fluids, such as seawater, certain
industrial chemicals, and bleach or bleach
containing products, etc., can cause a short circuit.
A short circuited battery pack may cause fire,
personal injury, and product damage.
STORE YOUR BATTERY AND CHARGER in a
cool, dry place. Do not store battery where
temperatures may exceed 120°F (50°C) such as in
direct sunlight, a vehicle or metal building during
the summer.
The product is not intended for use by persons
(including children) with reduced physical. sensory
or mental capabilities. or lack of experience and
knowledge. unless they have been given
supervision or instruction concerning use of the
appliance by a person responsible for their safety.
Children should be supervised to ensure that they
do not play with the product.
READ AND SAVE ALL INSTRUCTIONS FOR
FUTURE REFERENCE.
Charger Cat. No. ......................................... L4 PPS
Input.............................................. 5 V DC, 0.1 - 2.1 A
Charger Output ..................................... 4 V DC, 2.1 A
USB Max. Output ................................. 5 V DC, 2.1 A
Battery Cat. No.............................................. L4B2
Volts ................................................................. 4V DC
Operating Temperature
Battery and Charger... 4°C to 40°C (40°F to 104°F)
Battery ......................... -20°C to 60°C(0°F to 140°F)
SYMBOLOGY
Wall Plug Input Volts ..................................... 240V AC
Volts
Direct Current
Amps
BFP
SPECIFICATIONS
Regulatory
Compliance Mark
(RCM). This product
meets applicable
regulatory
requirements.
Properly Recycle
Batteries
Read Operator's
Manual
Backfeed
Protected
Class III
protection
BATTERY
WARNING
To reduce the risk of fire, personal
injury, and product damage due to a
short circuit, never immerse your tool, battery
pack or charger in fluid or allow a fluid to flow
inside them. Corrosive or conductive fluids, such
as seawater, certain industrial chemicals, and
bleach or bleach containing products, etc., can
cause a short circuit.
1
14.
This charger was
only suitable for
indoor use. Never
expose the charger
to rain.
T3.0A
Time-lag fuse 3.0A
16.