![background image](http://html1.mh-extra.com/html/midco/j121-ds/j121-ds_installation-and-service-instructions-manual_1790165001.webp)
Installation and Service Instructions
Midco
®
International Inc.
4140 West Victoria Street
Chicago, Illinois 60646
toll free 866.705.0514
tel
773.604.8700
fax
866.580.8700
web
www.midcointernational.com
Quality Designed for Proven Performance
Printed in USA
8471 15
• In the United States, installation must conform with local codes or
in the absence of local codes, with the National Fuel Gas Code,
ANSI Z223.1-latest edition available from American National
Standard Institute. Further reference should be made to the
recommendation of your fuel supplier.
• In Canada, installation must conform with local codes or in the
absence of local codes, with Installation Codes for Gas Burning
Appliances and Equipment, CGA Standard CAN/CGA 1-B-149.1
or 2.
•
WARNING: Additions, changes, conversions
and service must be performed by an authorized Midco
representative, service agency or the fuel supplier. Use only
MIDCO specifi ed and approved parts.
• INSTALLER: Inform and demonstrate to the user the correct
operation and maintenance of the gas utilization equipment.
Inform the user of the hazards of storing fl ammable liquids and
vapors in the vicinity of this gas utilization equipment and remove
such hazards. Affi x this manual and associated literature to the
burner.
CODE
COMPLIANCE
IS
THE
SOLE
RESPONSIBILITY OF THE INSTALLER.
• USER: Retain this manual for future reference. If other than
routine service or maintenance as described in this manual
and associated literature is required, contact a qualifi ed service
agency. DO NOT ATTEMPT REPAIRS. An inadvertent service
error could result in a dangerous condition.
WARNING: If the information in these instructions
is not followed exactly, a fi re or explosion may result,
causing property damage, personal injury or death.
Do not store or use gasoline or other fl ammable vapors and
liquids in the vicinity of this or any other appliance.
WHAT TO DO IF YOU SMELL GAS:
•
Do not try to light any appliance.
•
Do not touch any electrical switch; do not use any
phone in your building.
•
Immediately phone your gas supplier from another
building. Follow the gas supplier’s instructions. If
you cannot reach your gas supplier call the fi re
department.
Installation and service must be performed by a qualifi ed
installer, service agency or the gas supplier.
SAFETY INFORMATION TERMS:
The following terms are used to identify hazards, safety precaution of special notations and
have standard meanings throughout this manual. They are printed in all capital letters using a bold type face as shown below, and
preceded by the exclamation mark symbol. When you see the safety alert symbol and one of the safety information terms as shown
below, be aware of the hazard potential.
DANGER:
Identifi es the most serious hazards which will result in severe personal injury or death.
WARNING:
Signifi es a hazard that could result in personal injury or death.
CAUTION:
Identifi es unsafe practices which would result in minor personal injury or product and property
damage.
BURNER MODEL: ___________________________________
BILL OF MATERIAL
NUMBER:
___________________________________
SERIAL NUMBER #: ___________________________________
WIRING DIAGRAM: ___________________________________
FOR SERVICE CONTACT
Name:
____________________________________________
Address: ____________________________________________
____________________________________________
Phone: ____________________________________________
Date of Installation: ___________________________________
Incinomite
Model J121-DS
Gas Burner
C
O
M PAN
Y
R
E
G
IS TER
E
D
AVOID ERROR IN PARTS SELECTION.
When ordering use complete MIDCO
Part Number and Description. Furnish Burner Model Number, Bill of Material
Number and Serial Number (if available) from the specifi cation plate found on the
product.
IMPORTANT:
Availability of parts as well as specifi cations are subject to change
without notice. Please consult factory for item availability.
MADE
in the
USA
As an ISO 9001:2008 certi
fi
ed company, we proudly design, manufacture and assemble our products in Chicago, Illinois, USA.
The INCINOMITE Model J121-DS gas burner features direct main
fl ame spark ignition and solid state electronic fl ame verifi cation.
917