background image

CAUTION! 

 All accessories, switches, climate 

controls panels, and especially air bag indicator 

lights must be connected before cycling the 

ignition. Also, do not remove the factory radio 

with the key in the on position, or while the 

vehicle is running. 

I N S TA L L AT I O N I N S T R U C T I O N S

99-5722

The World’s best kits.

®

 

KIT FEATURES

• DIN radio provision with pocket
•  ISO DIN radio provision with pocket
•  ISO DDIN radio provision
•  Painted silver
•  Touchscreen display for climate and personalization features 

KIT COMPONENTS

• A) Radio trim panel with touchscreen display • B) A/C vent trim panels • C) ISO DDIN brackets • D) ISO DDIN trim plate • E) ISO DIN brackets
• F) ISO DIN trim plate • G) Pocket • H) (10) #8 x 3/8” Phillips screws

TOOLS REQUIRED

• Panel removal tool • Phillips screwdriver 
• 9/32” socket wrench • Cutting tool

TABLE OF CONTENTS

Dash Disassembly ...............................................2-3
Kit Preparation .......................................................4
Kit Assembly
–DIN radio provision with pocket ........................5
–ISO DIN radio provision with pocket ..................6
–ISO DDIN radio provision .....................................7
Axxess Interface Installation ............................8-16

WIRING & ANTENNA CONNECTIONS

 (sold separately)

Wiring Harness: Axxess interface 

and harness included

Antenna Adapter: 40-EU10 (sold separately)

A

B

C

G

D

E

F

Ford 

Taurus*

 

2010-2012

H

* Only for models with a key start

Summary of Contents for 99-5722

















Reviews: