Multi User Meter (DG001MM-MULTI)
QUICK START GUIDE
1. Press down Battery Cover and slide right.
2. Firmly insert battery with positive ( +) side up.
SET DATE AND TIME
LCD Display
Test Results & Messages
Main “M” Button
Power on/Memory Recall
Test Strip Port
Insert test strip blue side up.
Meter stays on for 3 min.
Settings “S” Button
Set Date & Time, Power off
FRONT
BACK
Battery Cover
Serial Number
BATTERY INSTALLATION
BEGIN TESTING
1. Month
2. Day
3. Hour
4. Minute
5. Year
1.
5.
2.
3. 4.
VIEW TEST RESULTS
1. Press the “M” button to turn on the meter. Press the “M” button again.
2. Last test results are displayed. Press “<” and “>” button to toggle results.
3. Press “M” button a third time to see 7, 14, 21, and 28 day averages.
4. Press “S” button to turn off Meter
6.0
12-25 20:00
mmol/L
Wash hands with
warm water and dry.
Insert MediSure test
strips in meter.
Apply blood sample.
Results in 6 seconds!
1. Press and hold the “S” button for 3+ seconds
2. Year flashes. P
uttons until the correct year is displayed.
3. Press the “S” button. Month flashes in the top left. Press the “>” or “<” buttons until
the correct year is displayed.
4. Repeat Step 3 for the Day, Hour (24 hours) and minutes.
5. Press the “S” button. Meter will display “SET” and turn off.
Date and time is now set.
1-855-MDI-SURE (855-634-7873) • WWW.MEDISURE.CA
The MediSure Meter
Put on Gloves and Prepare
Single Use, Auto Disabling Lancet
This Blood Glucose Monitoring System has been Licensed
by Health Canada for Multi Patient Use . It is intended for
use by health care professionals on multiple patients. It is
certified as safe to use for over 18,000 tests and in-
between cleaning protocols.
+
Perform In Between
Cleaning Protocol
after each use
Follow usage Instructions carefully. Use only with an auto-disabling, single use lancing device. A new pair of clean gloves
should be worn by the user before testing each patient.. Carefully follow cleaning and disinfection protocols between each use
