Mainland Energy Conversion Ltd.
Tel: +852 2366 9610
www.mec-powersolutions.com
Instruction Manual
LiFePO4 Battery Packs
24V/200Ah Series:
Safety Rules and General Warnings
•
Persons, who are not able to use the battery pack in a safe way, because of their physical, sensory or mental incompetence, or because of
their lack of experience, should not use without the control or instruction from a skilled or qualified person.
•
The battery pack is not suitable for children – Danger of Life. And beware of risk of electric shock at all time.
•
Avoid flammable gases, solvents or vapours all the time. Ensure sufficient air and prevent open flame or sparks. Never incinerate the battery
pack. Explosion RISK!
•
Follow strictly the charging and discharging instructions and use only chargers of appropriate specificaitons / charge profiles to charge the
battery pack.
•
Make sure the screws at the charge / discharge terminals are always tightened. Screw drivers used for tightening the screws must be well
electrically insulated.
•
DO NOT OPEN or DISMANTLE the battery pack. Repair work or cell replacement must only be processed by authorized technical staff.
•
Disassembling the battery pack may cause short circuit within the cells, which may further lead to fire, release of harmful gases, electrolyte
leakage or even explosion.
•
In case of any obvious damages such as deformed enclosure, electrolyte leakage or the presence of any unpleasant smell, the battery pack
must not be used. Disconnect from the charger or application immediately.
•
DO NOT TOUCH the electrolyte. It is harmful. If the electrolyte splashes into your eyes or on your skin, flush your eyes or skin with cold water
immediately and consult the doctor.
•
The battery pack should be protected against direct sun light, solar radiation or temperatures over 40°C.
•
Keep the battery pack in dry room (rel. humidity <80%). Clean with dry cloth only. Avoid fluid of any kind to get into the battery pack.
Special Features
•
Passive cooling and galvanized iron sheet enclosure
•
Auto heating mechanism at low temperature (at certain pre-set temperature)
•
Specially designed protective circuit to prevent the battery pack from over-charge or over-discharge
•
Automatic shut-off at unsafe temperatures
•
LED indicators or buzzer giving alarm at certain pre-set state of charge
Product Configuration
1.
BMS on/off Switch
2.
Generator Charge Terminal
3.
Charger Charge Terminal
4.
Communication Port
5.
Discharge Terminal
6.
Handle
IP50 battery pack equipped with a smart battery management system
(BMS) to ensure stable and highly efficient charge and discharge
performance. It can be charged by a lithium-based battery charger.
LiFePO4 is one of the safest Li-ions, recognized with the outstanding
electrochemical performance and endurability.
