![background image](http://html.mh-extra.com/html/meade/20-60x60-spotting-scope/20-60x60-spotting-scope_instructions_1757709001.webp)
FEATURES
1. Eyepiece - Look through the eyepiece and adjust
the focusing ring to see your target up close.
2. Zoom - Find a target and adjust the zoom to see
increased detail and image size. When finding a
target, its best to start with the least amount of
zoom(20x) and center the target. Then increase
the magnification and refocus as needed.
3. Focusing Ring - Adjust the focusing ring until
the viewed object is sharp. When the zoom is
adjusted, you may need to refocus.
4. Tube Mounting Ring - Holds the optical tube in
place when connected to the tripod. The optical
tube can be rotated around the optical axis to
put the eyepiece in a better viewing position.
5. Tube Mounting Ring Lock Knob - Rotate this lock
knob in the counter-clockwise direction to allow
rotation of the optical tube. Tighten this knob
when the eyepiece is in the preferred position.
6. Optical Tube - Holds the 60mm front lens and
zoom eyepiece in place for stable image quality.
7. Sun Shade - Extend the Sun Shade to reduce
scattered light or glare from the Sun.
8. Dust Cover - Protects the glass lenses in the front
of the spotting scope. Remove the dust cover
before use and always replace when finished.
9. Table Top Tripod - A stable mounting platform for
the spotting scope. Place on a picnic table, car
hood or other similar surface to make viewing
thru the scope comfortable.
10. Tripod Mounting Lock Knob - Attach the optical
tube to the tripod by tightening this screw.
11. Pan Handle - Allows for easy operation of the
spotting scope. Use the pan handle to help point
to objects and rotate it to lock the vertical motion.
ASSEMBLY
The 20-60x60mm spotting scope comes separated
from the tripod for easy storage and increased
portability. The optical tube is packed in its carry bag
which provides a convenient way to transport and
protect the spotting scope when not in use.
To assemble the optical tube & tripod, place the
optical tube onto the tripod as shown in the image.
The front 60mm lens should be placed opposite the
pan-handle. Tighten the Tripod Mount Lock Knob
into the base of the Tube Mounting Ring until secure.
Warning! Never point the spotting scope at or near the Sun! Immediate and
permanent eye damage will occur!
20-60X60 SPOTTING SCOPE
INSTRUCTIONS
1
4
5
6
7
8
9
3
2
10
11
Summary of Contents for 20-60x60 Spotting Scope
Page 2: ......