![background image](http://html1.mh-extra.com/html/mckesson/pharmaclik-pos-one/pharmaclik-pos-one_installation-manual_1755638001.webp)
Last Updated: 8 November 2016
Page 1 of 4
PharmaClik POS ONE
Self-Installation Guide
Congratulations on your purchase of PharmaClik POS ONE!
Your system is pre-configured and PharmaClik POS is pre-installed so that installation is as simple as
possible.
This install should take approximately one hour to complete and may need two people to unpack.
Note: We highly recommend the system be set up four to seven (4-7) days before going live to allow the
self-training to take place on the system itself.
Before You Begin
Be sure you have read the PharmaClik POS ONE Planning Guide and prepared your
environment before unpacking the boxes (power, network, counters).
Network Connection
McKesson provides a virtual private network (VPN) service which connects you to our secure network. If
you are using this, follow the Network Setup Instructions below.
If you did not order this service then plug the switch into your existing internet network.
**All instructions are related to the PTS provided equipment.