English
Made in Taiwan
to Matco specifications
DO NOT DISCARD – GIVE TO USER
Page 1
SMCFSM10
10 PIECE 3/8" DRIVE
METRIC CROWFOOT
WRENCH SET
PRODUCT INFORMATION:
• Normal use of this product is likely to expose the user to
dust and/or microscopic particles containing chemicals
known to the State of California to cause cancer, birth
defects or other reproductive harm. Always wear
appropriate safety equipment and clothing when using
this product. Study, understand and follow all instructions
provided with this product. Failure to read and follow all
warnings and operating instructions may result in
damages and serious injury or death.
• Always wear ANSI approved goggles when using this
product. (Users and bystanders).
• Never use this tool for any application other than for
which it was designed.
• Only use accessories designed for this tool.
• Never alter or modify this tool in any way.
• Improper operation and/or maintenance of the tool,
modification of the tool, or use of the tool with
accessories not designed for it could result in serious
injury or death.
• Always select the correct accessories of the correct size
and design for the job that you are attempting to perform.
• Always work in a clean, safe, well-lit, organized and
adequately equipped area.
• Do not begin repairs without assurance that vehicle is in
secure position, and will not move during repair.
WARNING
LIFETIME WARRANTY
The manufacturer warrants this product to the original
user against defective material or workmanship with a
lifetime guarantee.
The manufacturer reserves the right to determine
whether the part, or parts failed because of defective
material, workmanship, or other causes. Failures caused
by accident, alteration, or misuse are not covered by this
warranty.
Replacements under warranty also carry a Lifetime
Warranty. The rights under this warranty are limited to
the original user and may not be transferred to
subsequent owners.
The warranty is in lieu of all other warranties, expressed
or implied, including warranties of merchantability and
fitness for a particular purpose.
Some states do not allow the exclusion or limitations
of incidental or consequential damages, so the above
limitations may not apply to you.
WARNING
INTENDED USE OF THE TOOL
1703083-14
Study, understand and follow all instructions provided
with this product. Read these instructions carefully
before installing, operating, servicing or repairing this
tool. Keep these instructions in a safe accessible place.
This crowfoot wrench set is designed for fitting easily
on 3/8" drive extensions and ratchets for use on hex
head fasteners, while the precision machined build
fits fasteners snug, helping end rounded and stripped
heads. Do not use this tool outside of the designed
intent. Never modify the tool for any other purpose
or use.
BEFORE USE
Caution: To help prevent personal injury
Before use, check the parts diagram and part number listing
on page 2 to make sure all parts are included. If any parts
are missing or damaged, please call your distributor.
•
Access.
Crowfoot design and thin profile is
great for hard to reach areas and on fuel lines,
or hydraulics.
•
Coverage.
10mm to 19mm set skips no metric
sizes.
•
Design.
All sizes use the same 3/8" drive and
feature detents to lock onto ratchets and
extensions.
