BEFORE STARTING
CONTENTS
HOW TO SET TORQUE VALUE
Pull to unlock and turn it to set the target torque.
Then push it back to lock.
1
2
3
Set
Lock
Unlock
Body color : Black, Red, Blue or Green
Body
Graduation Scale
Driver 6.35mm
Main Scale
Knob
TORQUE
6.35
For example, ITEM NO. MTD6-1405NS target torque is 3.5 Nm.
Red line of main scale reach 3 Nm (see A) and adjust
graduation scale to 0.5 Nm (see B), Then 3+0.5=3.5 Nm (see C)
Manual
WARNING
A
B
C
1. Study this instruction before use.
2. This torque wrench as calibrated and tested before leaving the factory is certified to meet the current standard
specification and has an accuracy of ±6%.
3.
THIS TOOL IS A PRECISION MEASUREMENT AND DESIGNED FOR MANUAL TIGHTENING FASTERNERS ONLY.
DO NOT USE IT AS A NUT BREAKER OR FOR ANY OTHER PURPOSE.
4. Over torque will cause tool damage and personal injury.
5. Do not use this tool near rotating machinery.
6. Disassemble this tool or make any adjustments will result of losing accuracy and void the warranty.
7. Do not continuously apply force after hear click or feel shock.
8. Do not use any format of extension on the handle of the tool. This will not only damage the tool, also affect the accuracy.
9. Use special care at minimum torque setting.
10. Please wear gloves and goggles when working.
Torque screwdriver
Above MTD6-1405NS & 1450IS with
sliding T-Handle for more convenient use.
Manual
Supplied in a plastic box.
Only MTD6-1402NS & 1420IS
in a limpid box.
OPERATION MANUAL
Adjustable Torque Screwdriver
MTD6-NS
Models covered
