background image

3

2

INDEX

Page

OWNER’S INFORMATION .......................... 4
GENERAL .................................................... 8
SPECIFIC TOOLS ..................................... 10
GENERAL RULES FOR A CORRECT
OVERHAULING AND MAINTENANCE ..... 12
FAILURES, CAUSES AND REMEDIES .... 14
RECOMMENDATIONS FOR
MAINTENANCE ......................................... 16
INSTALLATION .......................................... 16
DISC BRAKE SYSTEM ASSEMBLY ......... 22
ADJUSTMENT ........................................... 24
DISASSEMBLY .......................................... 26
DISASSEMBLY DIAGRAM ........................ 26
REASSEMBLY ........................................... 36
FORK EXPLODED VIEW .......................... 44

INDICE

Pagina

INFORMAZIONI PER IL
PROPRIETARIO DELLA BICICLETTA ........ 5
GENERALITÀ .............................................. 8
ATTREZZATURA SPECIFICA ................... 10
REGOLE GENERALI ................................. 12
INCONVENIENTI, CAUSE E RIMEDI ........ 14
RACCOMANDAZIONI PER L’USO ............ 16
INSTALLAZIONE ....................................... 16
INSTALLAZIONE DELL’IMPIANTO
FRENO A DISCO ....................................... 22
REGOLAZIONE ......................................... 24
SCOMPOSIZIONE ..................................... 27
SCHEMA SEQUENZA DI SMONTAGGIO . 27
RICOMPOSIZIONE .................................... 36
ESPLOSO FORCELLA .............................. 44

INDEX

Page

INFORMATIONS POUR LE
PROPRIETAIRE DE LA BICYCLETTE ........ 6
INFORMATIONS GENERALES ................... 9
OUTILLAGE SPECIFIQUE ........................ 11
RÈGLES GÉNÉRALES ............................. 13
INCONVÉNIENTS, CAUSES ET
REMÈDES ................................................. 15
CONSEILS POUR L’UTILISATION ........... 17
INSTALLATION .......................................... 17
MONTAGE DU SYSTEME
DE FREINAGE A DISQUE ......................... 23
REGLAGE .................................................. 25
DÉCOMPOSITION ..................................... 28
SCHÉMA SUITE DE DEMONTAGE .......... 28
RÉCOMPOSITION ..................................... 37
PLAN ÉCLATE FOURCHE ........................ 44

INHALTSVERZEICHNIS

Seite

INFORMATIONEN FÜR DEN
FAHRRADBESITZER .................................. 7
ALLGEMEINES ............................................ 9
MARZOCCHI SPEZIFISCHE
AUSRÜSTUNG .......................................... 11
ALLGEMEINE NORMEN ........................... 13
MÄNGEL, URSACHEN UND ABHILFEN .. 15
ANWENDUNGSEMPFEHLUNGEN ........... 17
EINBAU ...................................................... 17
EINBAU DER
SCHEIBENBREMSALAGE ........................ 23
EINSTELLUNG .......................................... 25
AUSBAU .................................................... 29
AUSBAUSEQUENZSCHEMA .................... 29
WIEDERZUSAMMENBAU ......................... 37
GABELAUFBAUZEICHNUNG ................... 44

The figures and descriptions in this pamphlet are
provided as a guide.
We reserve the right to make changes to the
products without notice in line with our policy of
continuous improvement.

Always respect Nature when riding !

Le illustrazioni e descrizioni del presente opusco-
lo si intendono fornite a titolo indicativo.
La Casa si riserva pertanto il diritto di apportare ai
prodotti in qualsiasi momento e senza avviso
quelle modifiche che ritenesse utili per migliorarli
o per qualsiasi esigenza di carattere costruttivo e
commerciale.

In ogni Vostro spostamento rispettate

sempre la Natura!

Les illustrations et descriptions de cette brochure
sont fournies à titre indicatif.
La societé se réserve le droit d’apporter aux
produits, à n’importe quel moment et sans préa-
vis, toutes les modifications utiles à leur
amélioration, ou pour n’importe quelle nécessité
de caractère constructif et commercial.

Respectez la Nature dans tous vos

déplacements!

Die Abbildungen und Beschreibungen dieser Bro-
schüre sind als rein indikativ zu betrachten.
Der Hersteller behält sich das Recht vor, an sei-
nen Erzeugnissen jederzeit die Ånderungen ohne
Vorankündigung vorzunehmen, die er zu ihrer
Verbesserung oder aus herstellungstechnischen
oder kaufmännischen Gründen für erforderlich
hält.

Nehmen Sie bei allen Ihren Fahrten

Rücksicht auf die Natur!

Summary of Contents for Jr T 1999
























Reviews: