![background image](http://html.mh-extra.com/html/marshall-electronics/vac-12hs/vac-12hs_user-manual_1731431001.webp)
introduction
features
• Supported high-definition (HD) formats:
NTSC [email protected], PAL 625@50, 720p@50,[email protected],
720p@60, 1080i@50, [email protected], 1080i@60, [email protected],
1080p@24, 1080p@25, [email protected], 1080p@30, 1080p@50,
[email protected], 1080p@60
• Bit Rate: 2.97 Gbps, 2.967 Gbps, 1.485 Gbps, 1.4835 Gbps, 270 Mbps
• Auto 3G/HD/SD-SDI detection
• Support HDMI Deep Color
• Two SDI compliant outputs
• External DIP Switch Configuration
The VAC-12HS HDMI to 3G/HD/SD-SDI Converter provides a professional way
to convert HDMI to 3G/HD/SD SDI in real time. The conversion between SDI and
HDMI is purely digital and guarantees no loss of video and audio signal. Audio
is supported. * The VAC-12HS also provides two low jitter SDI outputs for daisy
chain or multiple monitors. With the use of VAC-12HS, the most popular
uncompressed video interface in the consumer world is readily available for
professional SDI equipment!
* SDI supports 48KHz. Dolby True HD and DTS HD are not supported in SDI.
HDMI Cable
SDI Cable
SDI Cable
Front
Rear
POWER
SIGNAL
HDMI IN
+ 5V DC
Device with SDI input
Device with SDI input
SDI OUT 1 SDI OUT 2
MODE
1910 East Maple Ave. El Segundo, CA 90245
Tel: (800) 800-6608 • (310) 333-0606
• Fax: 310-333-0688
www.Lcdracks.com
Marshall Electronics
3
6
Marshall Electronics
User Manual
FRONT PANEL
REAR PANEL
1. HDMI input
2. Signal LED:
<green> signal active
<red> power
3. Inter5V power jack
4. 3G/HD/SD-SDI output
5. 3G/HD/SD-SDI output
6. DIP switch (Pin #1 and Pin #2)
paneL description