flinders
shower panel
INSTALLATION GUIDE
3
4
5
1
9
7
6
6
7
9
10
11
6
13 12
1
2
6
1 Fixed panel
1 Wall jamb
4
φ
6mm Anchors
φ
4mm(
φ
5/32
") Stainless Steel Washer
11
10
9
7
9/
3/
11
10
2
12
8
1. 1 x Fixed panel with jamb
2. 1 x Wall jamb
3. 4 x 6mm anchors
4. 5 x 4mm SS washers
5. 4 x 3.5x35 SS screws
6. 4 x 3.9x8 SS screws
7. 4 x Screw caps
8. 1 x Wall jamb cap
9. 2 x Side panel covers(L/R)
10. 1 x Support arm assembly
11. 1 x 8mm anchors
12. 1 x 5x45 SS screw
COMPONENT LIST
STEP 1
A) Place wall jamb (2) on wall make sure jamb is plumb and mark
holes
B) Drill 4 x 6mm holes to a depth of 35mm in wall and insert 6mm
anchors (3)
C) Fix wall jamb using 4mm stainless steel washers (4) and 4 x
3.5x35mm screws (5)
STEP 2
A) Insert fixed panel (1) into wall jamb (2)
B) Drill 4 x 3.2mm holes and fix panel to wall jamb using 4 x
3.9x8mm screws (6) and fit plastic screw caps (7) over screw
heads
STEP 3
A) Place support arm in position on top of fixed panel and mark
position on wall. Drill 8mm hole to a depth of 35mm and insert
8mm anchor (11)
B) Fix support arm using 5x45mm stainless steel screws (12)
C) Tighten grub screw to fixed panel ensuring panel is level and
plumb
STEP 4
A) Place wall jamb cap (8) on wall jam and cover (9) for fixed panel
STEP 5
A) Apply silicone sealant around wall jam band fixed panel on external
joints only
B) Allow 24hrs for silicone to set bfore using shower
SHOWER PANEL MODELS
Model
Size
SSSP26CHCLP
2000 x 851 (+25)
SSSP34CHCLP
2000 x 1165 (+25)
