manualshive.com logo in svg
background image

6

PH2 TYPE

3.2

INSTALLATION  INSTRUCTIONS                           

www.aprilproducts.co.uk

Tools Required

Lifetime Product Guarantee

ATTENTION!

Are you fitting this April enclosure to an April

shower tray?

The Lifetime Product Guarantee is only valid

when an April enclosure is fitted with an April

shower tray and are used and maintained in

accordance with the manufacturer’s instructions

(guarantee excludes seals and magnets).

When April enclosures are used with any other

shower tray the guarantee period is limited to

10 years.

Please see our website for full Terms &

Conditions.

To activate your Product Guarantee please visit

www.aprilproducts.co.uk

 and complete the

online form.

U Shape Quadrant 

This product should be installed by a suitably qualified and proficient person. The fitting instructions should be 

followed carefully to ensure a proper and safe installation. Failure to follow these  instructions could result in future 

injury.

These instructions and list of parts assume that installation is done against solid/tiled walls.

Please check this product for damage prior to starting the installation. No claims can be made after the product has 

been fitted.

PLEASE NOTE :The minimum and maximum adjustment sizes noted on the product brochures are based on 

perfectly plumb walls and trays.

Содержание identiti U Shape Quadrant











Отзывы: