Programming instructions for KF373 & KF374
Key blade requires cutting by your local locksmith.
Key blade must be cut from key blade tip to remote head
Transponder requires programming with scan tool. Please contact your local
Mitsubishi dealer or workshop to program transponder in MAP part no: KF373 &
KF374.
REMOTE PROGRAMMING PROCEDURE:
1.
Insert key into the ignition (leave in the Lock position).
2.
Insert OBD Programmer in to the vehicles OBD2 port located beneath the dash.
3.
Press the hazard lights switch 6 times rapidly.
If performed correctly, the door locks will cycle. You are now in learn mode.
4.
Press the Lock button on new remote 4 times.
Door locks cycle when accepted.
5.
Repeat step 4 for any other remotes including old remotes.
6.
Remove OBD Programmer from the vehicles OBD port and remove the key from
the ignition to exit learn mode.
KF373
KF374
Blade
cutting
direction
Blade
cutting
direction
