Item
Quantity Position Part
1 3 C1,
C2,
C3
.22uF
2 1 C4
.01uF
3 1 C5
47uF
4 2 R1,
R4
1M
5 2 R3,
R6
6.8K
6 2 R2,
R5
2.2K
7 2 R8
3.3K
8 1 D1
1N4001
9
1
D2 (On/Off Indicator)
Green LED
10
1 R7
500KA
11
2 Q1,
Q2
J201
12
1
Output Jack
1/4” Mono Jack
13
1
Input Jack
1/4” Stereo Jack
14
1
On/Off Switch
3PDT Stomp Switch
15
1
DC Power Jack
DC Power Jack
16
1 (optional)
Battery
Snap
17
1
(On/Off Indicator)
LED Bezel
18
1
On/Off Switch
3PDT Wiring Board
19
1 Main
PCB
J201
PCB
20
1
Standalone Module
Click-Less Module
J201 CLEAN BOOST ASSEMBLY INSTRUCTIONS
RECOMMENDED TOOL AND SUPPLY LIST
J201 CLEAN BOOST KIT PARTS LIST
Thank you for purchasing the J201 Clean Boost Pedal Kit from Mammoth Electronics! This is a intermediate level kit that and we
have made every effort to make the assembly as easy as possible.
• Soldering station (with temperature control/regulation)
• Solder & Flux
• De-soldering braid or solder sucker
• Wire strippers
• Wire cutters
• Phillips head screwdriver
• Double-stick foam tape
If you have any questions about building the J201 Clean Boost or need any help with trouble-shooting, please send us an
email at [email protected] or give us a call at 405-254-4112.
All kits come standard with the following hardware:
• 1 ¼ inch mono jack
• 1 ¼ inch stereo jack
• 1 DC Power jack
• 1 9V Battery Snap
• 1 3PDT wiring board
• 1 LED Bezel
• 1 3PDT stomp switch (if selected)
• 1 Click-Less True Bypass relay board (if selected)
