Age 5+
Maisto – Radio Control Vehicles
WARNING!
Not suitable for children under the age of 36 months due to danger of
swallowing small parts. Choking hazard! Please keep this owner’s instruction
manual for future reference. It contains important information. We reserve the
right to improve/revise the product specifications without notice.
Contents:
RC Vehicle x 1
RC Transmitter x 1
Owner’s Instruction Manual x 1
Battery requirements:
Vehicle: 4 x 1.5V “AA” LR6/R6 batteries
Transmitter: 2 x 1.5V “AAA” LR03/R03 batteries
Battery installation for the Transmitter: (Refer to Diagram 1)
1. Use screwdriver to loosen the screw on the battery cover and to open the
battery cover. (Screwdriver is not included)
2. Install 2 new 1.5V “AAA” LR03/R03 batteries in the battery compartment with
correct polarity (+/-) as shown inside the compartment.
3. Install the battery cover and then tighten the screw on the battery cover.
Battery installation for the Vehicle: (Refer to Diagram 2)
1. Switch the power OFF.
2. Use a screwdriver to loosen the screw on the battery cover and to open the
battery cover. (Screwdriver is not included.)
3. Install 4 pieces new 1.5V “AA” LR6/R6 batteries with correct polarities (+/-) as
shown inside the battery compartment.
4. Install the battery cover and then tighten the screw on the battery cover.
How to play: (Refer to Diagram 3, 4 & 5)
1. Set the "Power Switch" on the controller and vehicle to ON position to match
the frequency.
2. If the frequency of the vehicle and controller does not match, switch off both
the vehicle and controller, then turn them on again.
3. Push the button on the controller to move the vehicle.
4. Turn the switch of the controller and vehicle to OFF position when not in play.
629438 / 82759
EN
R/C Off Road Go - 2.4 GHz
Forward
Backward
Left
turn
Right
turn
Diagram 4
Power Switch
Diagram 3
Diagram 1
2 X 1.5V "AAA"
LR03/R03
Batteries
Battery cover
Screw
Diagram 5
Wheel
alignment
Diagram 2
4 x 1.5V “AA”
LR6/R6 batteries
Screw
Battery
Cover
