AQB_MOD 2019
FX TYPE: delay modulation
©
The
AQB_MOD
is an add-on board to enable modulation on the Aquaboy (DM-2) project. For the
2019 version, I’ve added an optional LED that displays the modulation rate and an additional resistor
to prevent the depth control from being too extreme.
Controls
• RATE:
Sets modulation rate from slow to fast.
• DEPTH:
Sets modulation depth from min to max.
• SW:
Switches the modulation on and off.
Terms of Use:
You are free to use purchased
AQB_MOD
circuit boards for both DIY and small commercial operations. You may not
offer
AQB_MOD
PCBs for resale or as part of a “kit” in a commercial fashion. Peer to peer re-sale is fine, though.
Layout &Traces
Summary of Contents for AQB_MOD 2019
Page 6: ...Schematic ...
