background image

 

M2 Antenna Systems, Inc. 4402 N. Selland Ave. Fresno, CA 93722 

Tel: (559) 432-8873 Fax: (559) 432-3059 Web: www.m2inc.com 

©2016 M2 Antenna Systems Incorporated 

01/20/16 

Rev.03 

Model  ........................................ 20M6-125 
Frequency Range ...................... 14.0– 14.350 MHz 

*

Gain, (FS) / Over gnd ............... 11.19dBi / 16.6dBi @70’ 

Front to back .............................. 25 dB Typical 
Beamwidth   ............................... E=46° / H=60° 
Feed type ................................... Hair pin match 
Feed Impedance........................ 50 Ohms Unbalanced

 

Maximum VSWR ....................... 1.2:1 
Input Connector ......................... SO-239, Others avl. 

Power Handling ......................... 3 Kw, Higher avl. 
Boom Length / Dia ..................... 59’ / 3.0 x .125 Wall 
Element Length / Dia. ................ 36.5’ / 1 1/4” –1/2” 
Turning Radius: ......................... 40’ 
Stacking Distance ...................... 65’ -70’ 
Mast Size ................................... 2” to 3 ” Nom. 
Wind area / Survival .................. 16 Sq. Ft. / 125 MPH 
Weight / Ship Wt. ....................... 240 Lbs. / 270 Lbs. 
 

M2 Antenna Systems, Inc. 

Model No: 20M6-125 

FEATURES: 

            The 20M6-125 is a medium spaced, high performance, 

full band coverage

 6 element Yagi, computer optimized to 

squeeze the last drop of performance from this boom length. The design provides virtually flat gain, exceptional front to 
back and excellent VSWR never exceeding 2:1 at the upper band edge.  Larger, sleeved elements and boom provide the 
125 MPH wind survival factor. Construction includes machined boom to element mounting plates and a rugged hairpin 
match. This antenna will be in the air for many years, keeping you on the top of the pileup in spite of Mother Nature! 
There is no finer, stronger antenna available today.  

 

 

SPECIFICATIONS: 

*Subtract 2.14 from dBi for dBd /  FS = Free Space 

Summary of Contents for 20M6-125











Reviews: