T6530
M-LOCKS BV
Tel: +31 (0)314 376 876
Vlijtstraat 40
ver. 1.2 2011 10 21
Fax: +31 (0)314 376 878
NL-7005 BN Doetinchem
1
www.m-locks.com
Technical manual
Mounting Instructions
T6530 with blue foil keys
T6530 DL with Dallas reader and blue foil keys
T6530 B with black foil keys
T6530 DLB with Dallas reader and black foil keys
Optional for use with Straightbolt locks:
T9090 turnable backplate
DIMENSIONS
The terminal for the electronic key (Dallas Key) is located in the front, over the keypad (only models
T6530 DL and T6530 DLB).
Fixing of the input pad:
1 Stationary
2 Turnable
1. STATIONARY MOUNTING
The diameter of the cable hole should be minimum 9 mm, maximum 12 mm. The hole must be
deburred well to avoid damage to the cable.
-
Lift the pad so that you can see mounting holes.
-
Let lock’s connecting cable pass through the hole on safe’s door.
-
Insert and fix the two inbus screws, paying attention to cables, they have not to be squashed
by housing and let battery cables have easy access.
-
Drill (3,5 mm) the screw heads so that tools don’t work for dismounting (due to EN1300)
Clean the keypad surface.
Remove adhesive film from pad and line up margins carefully, before fixing it.
