Page 1 of 44
©2018 Lytx, Inc. - Confidential & Proprietary.
Lytx
®
ER-SV2 Event Recorder
Installation Instructions
(North America Edition)
Last updated: 6/18/2018
THE DEVICE SHOULD BE INSTALLED AND MAINTAINED BY QUALIFIED TECHNICIANS. Only a properly qualified technician
should install and maintain the ER-SV2 device. Any electrical work should be performed only by an ASE (minimum T6 &
L2), MECP or equivalent certified technician with an expertise in installing and troubleshooting advanced vehicle onboard
components including multiplexed circuits. Lytx, Inc. disclaims all responsibility for any damages arising from improper
installation and maintenance of the ER-SV2 device.
This guide is protected as confidential and proprietary information of Lytx, Inc. Copying and use of this guide for any
purpose other than installing ER-SV2 in vehicles of Lytx, Inc.’s customers is expressly prohibited. Information contained
in this guide was in effect as of the date set forth above and is subject to change without notice or liability. Lytx, Inc.
reserves the right to revise the information presented or to discontinue the production of parts described at any time.
