![background image](http://html1.mh-extra.com/html/luxium/zr30-ax1/zr30-ax1_setup-instructions_1952356001.webp)
Wireless Transmitter Setup Instructions
09/2016
Wireless DMX Setup Instructions
For Luxium TR30-AX1 and ZR30-AX1
The TR30-AX1 luminaire and ZR30-AX1 lamps are wireless DMX capable lights that can be set
up to operate in a DMX universe by using a Wi-DMX transmitter that passes command signals
from the control console to the lamps. The system works by sending DMX control signals over
the air using digital spread spectrum communications and a 2.4GHz radio to one or more lamps
that have been paired with a transmitter. Once the transmitter is paired with the lamps a
permanent relationship is established until a lamp is reset. The lights can also be used in wired
mode. If a light has been paired with a transmitter it must be un-paired before using with a
different transmitter or for use in wired mode.
Wi-DMX Pro
TM
For communication with any DMX controller, a DMX cable is connected to the Wi-DMX Pro
TM
via the included 3-pin or 5-pin XLR jack. The Wi-DMX Pro
TM
is directly wired to the DMX512
controller system using a standard 3-pin or 5-pin XLR cable. The Wi-DMX Pro
TM
radio will send
commands to all Luxium wireless DMX lamps that have been paired with the transmitter.
TR3-AX1 luminaires may also
be paired with the WiDMX
transmitter